This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear TASMIN,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Wed Mar 26 00:08:08 2008] Trying to get
'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/T/TA/TASMIN/PrayMind-1.01.tar.gz'
[MSG] [Wed Mar 26 00:08:12 2008] Trying to get
'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/T/TA/TASMIN/CHECKSUMS'
[MSG] [Wed Mar 26 00:08:13 2008] Checksum matches for
'PrayMind-1.01.tar.gz'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind-1.01/Changes'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind-1.01/License.txt'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind-1.01/Makefile.PL'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind-1.01/MANIFEST'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind-1.01/PrayMind.pm'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind-1.01/README'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind-1.01/test.pl'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted
'PrayMind-1.01/example/CitiesList.pl'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted
'PrayMind-1.01/example/CityTimes.pl'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted
'PrayMind-1.01/example/ContinentsList.pl'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted
'PrayMind-1.01/example/CountriesList.pl'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind-1.01/example'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind-1.01'
[MSG] [Wed Mar 26 00:08:13 2008] Extracted 'PrayMind' to
'/opt/perl/testers/.cpanplus/5.8.8/build/PrayMind-1.01'
[MSG] [Wed Mar 26 00:08:14 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Religion::Islam::PrayMind
[MSG] [Wed Mar 26 00:08:14 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Wed Mar 26 00:08:14 2008] cp PrayMind.pm
blib/lib/Religion/Islam/PrayMind.pm
Manifying blib/man3/Religion::Islam::PrayMind.3
[ERROR] [Wed Mar 26 00:08:14 2008] MAKE TEST failed:
不希望的裝置輸出入控制 (ioctl) 1..1
# Running under perl version 5.008008 for linux
# Current time local: Wed Mar 26 00:08:14 2008
# Current time GMT: Tue Mar 25 16:08:14 2008
# Using Test.pm version 1.25
Can't locate XML/Parser.pm in @[EMAIL PROTECTED]
(@[EMAIL PROTECTED]
contains: blib/lib blib/arch
/home/imacat/lib/perl5
/opt/perl/testers/.cpanplus/5.8.8/build/PrayMind-1.01/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/PrayMind-1.01/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/PrayMind-1.01/blib
/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld
/opt/perl/testers/lib/5.8.8
/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld
/opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .)
at blib/lib/Religion/Islam/PrayMind.pm line 32.
BEGIN failed--compilation aborted at blib/lib/Religion/Islam/PrayMind.pm
line 32.
Compilation failed in require at test.pl line 10.
BEGIN failed--compilation aborted at test.pl line 10.
make: *** [test_dynamic] Error 2
[MSG] [Wed Mar 26 00:08:15 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
XML::Parser
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'TASMIN (cpanplus-info@[EMAIL PROTECTED]
)',
... # other information
PREREQ_PM => {
'XML::Parser' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/>
may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
|
