This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear RGEOFFREY,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Mar 25 06:12:57 2008] Trying to get
'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/R/RG/RGEOFFREY/ExtUtils-ModuleMaker-0.204.tar.gz'
[MSG] [Tue Mar 25 06:13:00 2008] Trying to get
'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/R/RG/RGEOFFREY/CHECKSUMS'
[MSG] [Tue Mar 25 06:13:01 2008] Checksum matches for
'ExtUtils-ModuleMaker-0.204.tar.gz'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted 'ExtUtils-ModuleMaker-0.204/'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/.cvsignore'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/Changes'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/lib/'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/lib/ExtUtils/'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/lib/ExtUtils/ModuleMaker/'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/lib/ExtUtils/ModuleMaker/Licenses.pm'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/lib/ExtUtils/ModuleMaker.pm'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/LICENSE'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/Makefile.PL'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/MANIFEST'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/MANIFEST.SKIP'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/README'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/script/'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/script/eumm'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted 'ExtUtils-ModuleMaker-0.204/t/'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/t/01_ini.t'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/t/02_ini_licenses.t'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/t/03_quick.t'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted
'ExtUtils-ModuleMaker-0.204/t/04_longer.tx'
[MSG] [Tue Mar 25 06:13:01 2008] Extracted 'ExtUtils::ModuleMaker' to
'/opt/perl/testers/.cpanplus/5.8.8/build/ExtUtils-ModuleMaker-0.204'
[MSG] [Tue Mar 25 06:13:01 2008] Checking if your kit is complete...
Looks good
Writing Makefile for ExtUtils::ModuleMaker
[MSG] [Tue Mar 25 06:13:01 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Tue Mar 25 06:13:02 2008] cp lib/ExtUtils/ModuleMaker.pm
blib/lib/ExtUtils/ModuleMaker.pm
cp lib/ExtUtils/ModuleMaker/Licenses.pm
blib/lib/ExtUtils/ModuleMaker/Licenses.pm
Manifying blib/man3/ExtUtils::ModuleMaker.3
Manifying blib/man3/ExtUtils::ModuleMaker::Licenses.3
[ERROR] [Tue Mar 25 06:13:02 2008] MAKE TEST failed:
不希望的裝置輸出入控制 (ioctl) t/01_ini...............ok
t/02_ini_licenses......ok
t/03_quick.............creating directory for 'Sample'
creating directory for 'Sample/Module'
creating directory for 'Sample/Module/lib'
creating directory for 'Sample/Module/lib/Sample'
All 1 subtests passed
Test Summary Re****t
-------------------
t/03_quick.t (Wstat: 0 Tests: 1 Failed: 0)
Parse errors: No plan found in TAP output
Files=3, Tests=3, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.04 cusr
0.04 csys = 0.09 CPU)
Result: FAIL
Failed 1/3 test programs. 0/3 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Tue Mar 25 06:13:02 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
|
