This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Rocco Caputo,
This is a computer-generated re****t for POE-0.9999_02
on perl 5.8.6, created by CPAN-Re****ter-1.12.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this re****t is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1
/home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/perl-5.8.0@[EMAIL PROTECTED]
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')"
t/*.t t/*/*.t t/*/*/*.t
t/10_units/01_pod/01_pod.......................ok
t/10_units/01_pod/02_pod_coverage..............ok
t/10_units/02_pipes/01_base....................skipped: not implemented
yet
t/10_units/02_pipes/02_oneway..................ok
t/10_units/02_pipes/03_twoway..................ok
t/10_units/03_base/01_poe......................ok
t/10_units/03_base/03_component................ok
t/10_units/03_base/04_driver...................ok
t/10_units/03_base/05_filter...................ok
t/10_units/03_base/06_loop.....................ok
t/10_units/03_base/07_queue....................ok
t/10_units/03_base/08_resource.................ok
t/10_units/03_base/09_resources................ok
t/10_units/03_base/10_wheel....................ok
t/10_units/03_base/11_assert_usage.............ok
t/10_units/03_base/12_assert_retval............ok
t/10_units/03_base/13_assert_data..............ok
t/10_units/03_base/14_kernel...................ok
t/10_units/03_base/15_kernel_internal..........ok
t/10_units/03_base/16_explicit_loop............ok
t/10_units/03_base/17_explicit_loop_fail.......ok
t/10_units/04_drivers/01_sysrw.................ok
t/10_units/05_filters/01_block.................ok
t/10_units/05_filters/02_grep..................ok
t/10_units/05_filters/03_http..................ok
t/10_units/05_filters/04_line..................ok
t/10_units/05_filters/05_map...................ok
t/10_units/05_filters/06_recordblock...........ok
t/10_units/05_filters/07_reference.............ok
t/10_units/05_filters/08_stream................ok
t/10_units/05_filters/50_stackable.............ok
t/10_units/05_filters/99_filterchange..........ok
t/10_units/06_queues/01_array..................ok
t/10_units/07_exceptions/01_normal.............ok
t/10_units/07_exceptions/02_turn_off...........ok
t/10_units/07_exceptions/03_not_handled........ok
t/20_resources/10_perl/aliases.................ok
t/20_resources/10_perl/caller_state............ok
t/20_resources/10_perl/events..................ok
t/20_resources/10_perl/extrefs.................ok
t/20_resources/10_perl/extrefs_gc..............ok
t/20_resources/10_perl/filehandles.............ok
t/20_resources/10_perl/sessions................ok
t/20_resources/10_perl/sids....................ok
t/20_resources/10_perl/signals.................ok
t/20_resources/10_perl/statistics..............skipped: not implemented
yet
t/30_loops/10_select/all_errors................skipped: most of these
should move into other test files
t/30_loops/10_select/comp_tcp..................ok
t/30_loops/10_select/comp_tcp_concurrent.......# You might see a
'disconnect' error during this test.
# It may be ignored.
ok
t/30_loops/10_select/k_alarms..................ok
t/30_loops/10_select/k_aliases.................ok
t/30_loops/10_select/k_detach..................ok
t/30_loops/10_select/k_selects.................ok
t/30_loops/10_select/k_sig_child...............# Waiting 2 seconds for
child processes to settle.
ok
t/30_loops/10_select/k_signals.................# Waiting 2 seconds for
child processes to settle.
ok
t/30_loops/10_select/k_signals_rerun...........ok
t/30_loops/10_select/sbk_signal_init...........ok
t/30_loops/10_select/ses_nfa...................ok
t/30_loops/10_select/ses_session...............ok
t/30_loops/10_select/wheel_accept..............ok
t/30_loops/10_select/wheel_curses..............skipped: Need help with
Curses functions blocking under ptys
t/30_loops/10_select/wheel_readline............ok
t/30_loops/10_select/wheel_readwrite...........ok
t/30_loops/10_select/wheel_run.................ok
t/30_loops/10_select/wheel_sf_ipv6.............# This test may hang if
your firewall blocks IPv6
# packets across your localhost interface.
ok
t/30_loops/10_select/wheel_sf_tcp..............ok
t/30_loops/10_select/wheel_sf_udp..............ok
t/30_loops/10_select/wheel_sf_unix.............ok
t/30_loops/10_select/wheel_tail................ok
t/30_loops/20_poll/all_errors..................skipped: most of these
should move into other test files
t/30_loops/20_poll/comp_tcp....................ok
t/30_loops/20_poll/comp_tcp_concurrent.........# You might see a
'disconnect' error during this test.
# It may be ignored.
ok
t/30_loops/20_poll/k_alarms....................ok
t/30_loops/20_poll/k_aliases...................ok
t/30_loops/20_poll/k_detach....................ok
t/30_loops/20_poll/k_selects...................ok
t/30_loops/20_poll/k_sig_child.................# Waiting 2 seconds for
child processes to settle.
ok
t/30_loops/20_poll/k_signals...................# Waiting 2 seconds for
child processes to settle.
ok
t/30_loops/20_poll/k_signals_rerun.............ok
t/30_loops/20_poll/sbk_signal_init.............ok
t/30_loops/20_poll/ses_nfa.....................ok
t/30_loops/20_poll/ses_session.................ok
t/30_loops/20_poll/wheel_accept................ok
t/30_loops/20_poll/wheel_curses................skipped: Need help with
Curses functions blocking under ptys
t/30_loops/20_poll/wheel_readline..............ok
t/30_loops/20_poll/wheel_readwrite.............ok
t/30_loops/20_poll/wheel_run...................ok
t/30_loops/20_poll/wheel_sf_ipv6...............# This test may hang if
your firewall blocks IPv6
# packets across your localhost interface.
ok
t/30_loops/20_poll/wheel_sf_tcp................ok
t/30_loops/20_poll/wheel_sf_udp................ok
t/30_loops/20_poll/wheel_sf_unix...............ok
t/30_loops/20_poll/wheel_tail..................ok
t/30_loops/30_event/all_errors.................skipped: most of these
should move into other test files
t/30_loops/30_event/comp_tcp...................ok
t/30_loops/30_event/comp_tcp_concurrent........# You might see a
'disconnect' error during this test.
# It may be ignored.
ok
t/30_loops/30_event/k_alarms...................ok
t/30_loops/30_event/k_aliases..................ok
t/30_loops/30_event/k_detach...................ok
t/30_loops/30_event/k_selects..................ok
t/30_loops/30_event/k_sig_child................# Waiting 2 seconds for
child processes to settle.
ok
t/30_loops/30_event/k_signals..................# Waiting 2 seconds for
child processes to settle.
ok
t/30_loops/30_event/k_signals_rerun............Event: trapped error in `??
Event.pm:46': ?
ok
t/30_loops/30_event/sbk_signal_init............ok
t/30_loops/30_event/ses_nfa....................ok
t/30_loops/30_event/ses_session................ok
t/30_loops/30_event/wheel_accept...............ok
t/30_loops/30_event/wheel_curses...............skipped: Need help with
Curses functions blocking under ptys
t/30_loops/30_event/wheel_readline.............ok
t/30_loops/30_event/wheel_readwrite............ok
t/30_loops/30_event/wheel_run..................ok
t/30_loops/30_event/wheel_sf_ipv6..............# This test may hang if
your firewall blocks IPv6
# packets across your localhost interface.
ok
t/30_loops/30_event/wheel_sf_tcp...............ok
t/30_loops/30_event/wheel_sf_udp...............ok
t/30_loops/30_event/wheel_sf_unix..............ok
t/30_loops/30_event/wheel_tail.................ok
t/30_loops/40_gtk/all_errors...................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/comp_tcp.....................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/comp_tcp_concurrent..........skipped: Gtk could not be
loaded
t/30_loops/40_gtk/k_alarms.....................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/k_aliases....................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/k_detach.....................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/k_selects....................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/k_sig_child..................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/k_signals....................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/k_signals_rerun..............skipped: Gtk could not be
loaded
t/30_loops/40_gtk/sbk_signal_init..............skipped: Gtk could not be
loaded
t/30_loops/40_gtk/ses_nfa......................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/ses_session..................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_accept.................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_curses.................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_readline...............skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_readwrite..............skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_run....................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_sf_ipv6................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_sf_tcp.................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_sf_udp.................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_sf_unix................skipped: Gtk could not be
loaded
t/30_loops/40_gtk/wheel_tail...................skipped: Gtk could not be
loaded
t/30_loops/50_tk/all_errors....................skipped: most of these
should move into other test files
t/30_loops/50_tk/comp_tcp......................ok
t/30_loops/50_tk/comp_tcp_concurrent...........# You might see a
'disconnect' error during this test.
# It may be ignored.
ok
t/30_loops/50_tk/k_alarms......................ok
t/30_loops/50_tk/k_aliases.....................ok
t/30_loops/50_tk/k_detach......................ok
t/30_loops/50_tk/k_selects.....................ok
t/30_loops/50_tk/k_sig_child...................# Waiting 2 seconds for
child processes to settle.
ok
t/30_loops/50_tk/k_signals.....................# Waiting 2 seconds for
child processes to settle.
ok
t/30_loops/50_tk/k_signals_rerun...............ok
t/30_loops/50_tk/sbk_signal_init...............ok
t/30_loops/50_tk/ses_nfa.......................ok
t/30_loops/50_tk/ses_session...................ok
t/30_loops/50_tk/wheel_accept..................ok
t/30_loops/50_tk/wheel_curses..................skipped: Need help with
Curses functions blocking under ptys
t/30_loops/50_tk/wheel_readline................ok
t/30_loops/50_tk/wheel_readwrite...............ok
t/30_loops/50_tk/wheel_run.....................ok
t/30_loops/50_tk/wheel_sf_ipv6.................# This test may hang if
your firewall blocks IPv6
# packets across your localhost interface.
ok
t/30_loops/50_tk/wheel_sf_tcp..................ok
t/30_loops/50_tk/wheel_sf_udp..................ok
t/30_loops/50_tk/wheel_sf_unix.................ok
t/30_loops/50_tk/wheel_tail....................ok
t/90_regression/agaran-filter-httpd............ok
t/90_regression/averell-callback-ret...........ok
t/90_regression/bingos-followtail..............ok
t/90_regression/broeren-win32-nbio.............skipped: This test examines
ActiveState Perl behavior.
t/90_regression/cfedde-filter-httpd............ok
t/90_regression/ferrari-server-unix............ok
t/90_regression/merijn-sigchld-system..........# Using '/bin/true' as our
thing to run under system()
ok
t/90_regression/neyuki_detach..................ok
t/90_regression/rt14444-arg1...................ok
t/90_regression/rt1648-tied-stderr.............ok
t/90_regression/rt19908-merlyn-stop............ok
t/90_regression/rt23181-sigchld-rc.............ok
t/90_regression/steinert-passed-wheel..........ok
t/90_regression/steinert-signal-integrity......ok
t/90_regression/suzman_windows.................ok
t/90_regression/ton-stop-corruption............ok
t/90_regression/whelan-dieprop.................ok
t/90_regression/whjackson-followtail...........ok
All tests successful.
Files=179, Tests=4837, 357 wallclock secs ( 4.18 usr 0.54 sys + 117.31
cusr 10.07 csys = 132.10 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------- ---- -------
Carp 0 1.03
Errno 1.09 1.09_01
Ex****ter 0 5.62
File::Spec 0.87 3.2701
IO::Handle 1.27 1.27
POSIX 1.02 1.08
Socket 1.7 1.77
Storable 2.16 2.18
Test::Harness 2.26 3.10
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = de_DE.UTF-8
PATH =
/usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 26270
PERL5_CPAN_IS_RUNNING = 26270
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X =
/home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/perl-5.8.0@[EMAIL PROTECTED]
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.92_59
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.14
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51
ExtUtils::Par***S 2.19
File::Spec 3.2701
Module::Build 0.2808
Module::Signature 0.55
Test::Harness 3.10
Test::More 0.74
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
Platform:
osname=linux, osvers=2.6.18-4-k7,
archname=i686-linux-thread-multi-64int
uname='linux k75 2.6.18-4-k7 #1 smp mon mar 26 17:57:15 utc 2007 i686
gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/perl-5.8.0@[EMAIL PROTECTED]
-Uversiononly -des -Dusethreads -Duse64bitint
-Dusedevel -Doptimize=-g -Dnoextensions=Encode'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8,
Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
|
