This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Rocco Caputo,
This is a computer-generated re****t for POE-0.9999_02
on perl 5.8.8, created by CPAN-Re****ter-1.12.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this re****t is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1
/home/src/perl/repoperls/installed-perls/maint-5.8/pIS17Oa/perl-5.8.0@[EMAIL PROTECTED]
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')"
t/*.t t/*/*.t t/*/*/*.t
t/10_units/01_pod/01_pod.....................ok
t/10_units/01_pod/02_pod_coverage............ok
1/51 skipped: various reasons
t/10_units/02_pipes/01_base..................skipped
all skipped: not implemented yet
t/10_units/02_pipes/02_oneway................ok
t/10_units/02_pipes/03_twoway................ok
t/10_units/03_base/01_poe....................ok
t/10_units/03_base/03_component..............ok
t/10_units/03_base/04_driver.................ok
t/10_units/03_base/05_filter.................ok
t/10_units/03_base/06_loop...................ok
t/10_units/03_base/07_queue..................ok
t/10_units/03_base/08_resource...............ok
t/10_units/03_base/09_resources..............ok
t/10_units/03_base/10_wheel..................ok
t/10_units/03_base/11_assert_usage...........ok
t/10_units/03_base/12_assert_retval..........ok
t/10_units/03_base/13_assert_data............ok
t/10_units/03_base/14_kernel.................ok
t/10_units/03_base/15_kernel_internal........ok
t/10_units/03_base/16_explicit_loop..........ok
t/10_units/03_base/17_explicit_loop_fail.....ok
t/10_units/04_drivers/01_sysrw...............ok
t/10_units/05_filters/01_block...............ok
t/10_units/05_filters/02_grep................ok
t/10_units/05_filters/03_http................ok
5/91 skipped: various reasons
t/10_units/05_filters/04_line................ok
t/10_units/05_filters/05_map.................ok
t/10_units/05_filters/06_recordblock.........ok
t/10_units/05_filters/07_reference...........ok
t/10_units/05_filters/08_stream..............ok
t/10_units/05_filters/50_stackable...........ok
t/10_units/05_filters/99_filterchange........ok
t/10_units/06_queues/01_array................ok
t/10_units/07_exceptions/01_normal...........ok
t/10_units/07_exceptions/02_turn_off.........ok
t/10_units/07_exceptions/03_not_handled......ok
t/20_resources/10_perl/aliases...............ok
t/20_resources/10_perl/caller_state..........ok
t/20_resources/10_perl/events................ok
t/20_resources/10_perl/extrefs...............ok
t/20_resources/10_perl/extrefs_gc............ok
t/20_resources/10_perl/filehandles...........ok
t/20_resources/10_perl/sessions..............ok
t/20_resources/10_perl/sids..................ok
t/20_resources/10_perl/signals...............ok
t/20_resources/10_perl/statistics............skipped
all skipped: not implemented yet
t/30_loops/10_select/all_errors..............skipped
all skipped: most of these should move into other test files
t/30_loops/10_select/comp_tcp................ok
t/30_loops/10_select/comp_tcp_concurrent.....# You might see a
'disconnect' error during this test.
# It may be ignored.
ok
t/30_loops/10_select/k_alarms................ok
t/30_loops/10_select/k_aliases...............ok
t/30_loops/10_select/k_detach................ok
t/30_loops/10_select/k_selects...............ok
t/30_loops/10_select/k_sig_child.............# Waiting 2 seconds for child
processes to settle.
ok
t/30_loops/10_select/k_signals...............# Waiting 2 seconds for child
processes to settle.
ok
t/30_loops/10_select/k_signals_rerun.........ok
t/30_loops/10_select/sbk_signal_init.........ok
t/30_loops/10_select/ses_nfa.................ok
t/30_loops/10_select/ses_session.............ok
t/30_loops/10_select/wheel_accept............ok
t/30_loops/10_select/wheel_curses............skipped
all skipped: Need help with Curses functions blocking under ptys
t/30_loops/10_select/wheel_readline..........ok
t/30_loops/10_select/wheel_readwrite.........ok
t/30_loops/10_select/wheel_run...............ok
t/30_loops/10_select/wheel_sf_ipv6...........# This test may hang if your
firewall blocks IPv6
# packets across your localhost interface.
ok
t/30_loops/10_select/wheel_sf_tcp............ok
t/30_loops/10_select/wheel_sf_udp............ok
t/30_loops/10_select/wheel_sf_unix...........ok
t/30_loops/10_select/wheel_tail..............ok
t/30_loops/20_poll/all_errors................skipped
all skipped: most of these should move into other test files
t/30_loops/20_poll/comp_tcp..................ok
t/30_loops/20_poll/comp_tcp_concurrent.......# You might see a
'disconnect' error during this test.
# It may be ignored.
ok
t/30_loops/20_poll/k_alarms..................ok
t/30_loops/20_poll/k_aliases.................ok
t/30_loops/20_poll/k_detach..................ok
t/30_loops/20_poll/k_selects.................ok
t/30_loops/20_poll/k_sig_child...............# Waiting 2 seconds for child
processes to settle.
ok
t/30_loops/20_poll/k_signals.................# Waiting 2 seconds for child
processes to settle.
ok
t/30_loops/20_poll/k_signals_rerun...........ok
t/30_loops/20_poll/sbk_signal_init...........ok
t/30_loops/20_poll/ses_nfa...................ok
t/30_loops/20_poll/ses_session...............ok
t/30_loops/20_poll/wheel_accept..............ok
t/30_loops/20_poll/wheel_curses..............skipped
all skipped: Need help with Curses functions blocking under ptys
t/30_loops/20_poll/wheel_readline............ok
t/30_loops/20_poll/wheel_readwrite...........ok
t/30_loops/20_poll/wheel_run.................ok
t/30_loops/20_poll/wheel_sf_ipv6.............# This test may hang if your
firewall blocks IPv6
# packets across your localhost interface.
ok
t/30_loops/20_poll/wheel_sf_tcp..............ok
t/30_loops/20_poll/wheel_sf_udp..............ok
t/30_loops/20_poll/wheel_sf_unix.............ok
t/30_loops/20_poll/wheel_tail................ok
t/30_loops/30_event/all_errors...............skipped
all skipped: most of these should move into other test files
t/30_loops/30_event/comp_tcp.................ok
t/30_loops/30_event/comp_tcp_concurrent......# You might see a
'disconnect' error during this test.
# It may be ignored.
ok
t/30_loops/30_event/k_alarms.................ok
t/30_loops/30_event/k_aliases................ok
t/30_loops/30_event/k_detach.................ok
t/30_loops/30_event/k_selects................ok
t/30_loops/30_event/k_sig_child..............# Waiting 2 seconds for child
processes to settle.
ok
t/30_loops/30_event/k_signals................# Waiting 2 seconds for child
processes to settle.
ok
t/30_loops/30_event/k_signals_rerun..........Event: trapped error in `??
Event.pm:46': ?
ok
t/30_loops/30_event/sbk_signal_init..........ok
t/30_loops/30_event/ses_nfa..................ok
t/30_loops/30_event/ses_session..............ok
t/30_loops/30_event/wheel_accept.............ok
t/30_loops/30_event/wheel_curses.............skipped
all skipped: Need help with Curses functions blocking under ptys
t/30_loops/30_event/wheel_readline...........ok
t/30_loops/30_event/wheel_readwrite..........ok
t/30_loops/30_event/wheel_run................ok
t/30_loops/30_event/wheel_sf_ipv6............# This test may hang if your
firewall blocks IPv6
# packets across your localhost interface.
ok
t/30_loops/30_event/wheel_sf_tcp.............ok
t/30_loops/30_event/wheel_sf_udp.............ok
t/30_loops/30_event/wheel_sf_unix............ok
t/30_loops/30_event/wheel_tail...............ok
t/30_loops/40_gtk/all_errors.................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/comp_tcp...................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/comp_tcp_concurrent........skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/k_alarms...................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/k_aliases..................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/k_detach...................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/k_selects..................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/k_sig_child................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/k_signals..................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/k_signals_rerun............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/sbk_signal_init............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/ses_nfa....................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/ses_session................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_accept...............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_curses...............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_readline.............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_readwrite............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_run..................skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_sf_ipv6..............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_sf_tcp...............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_sf_udp...............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_sf_unix..............skipped
all skipped: Gtk could not be loaded
t/30_loops/40_gtk/wheel_tail.................skipped
all skipped: Gtk could not be loaded
t/30_loops/50_tk/all_errors..................skipped
all skipped: most of these should move into other test files
t/30_loops/50_tk/comp_tcp....................ok
t/30_loops/50_tk/comp_tcp_concurrent.........# You might see a
'disconnect' error during this test.
# It may be ignored.
ok
t/30_loops/50_tk/k_alarms....................ok
t/30_loops/50_tk/k_aliases...................ok
t/30_loops/50_tk/k_detach....................ok
t/30_loops/50_tk/k_selects...................ok
t/30_loops/50_tk/k_sig_child.................# Waiting 2 seconds for child
processes to settle.
ok
t/30_loops/50_tk/k_signals...................# Waiting 2 seconds for child
processes to settle.
ok
t/30_loops/50_tk/k_signals_rerun.............ok
t/30_loops/50_tk/sbk_signal_init.............ok
t/30_loops/50_tk/ses_nfa.....................ok
t/30_loops/50_tk/ses_session.................ok
t/30_loops/50_tk/wheel_accept................ok
t/30_loops/50_tk/wheel_curses................skipped
all skipped: Need help with Curses functions blocking under ptys
t/30_loops/50_tk/wheel_readline..............ok
t/30_loops/50_tk/wheel_readwrite.............ok
13/28 skipped: various reasons
t/30_loops/50_tk/wheel_run...................ok
t/30_loops/50_tk/wheel_sf_ipv6...............# This test may hang if your
firewall blocks IPv6
# packets across your localhost interface.
ok
t/30_loops/50_tk/wheel_sf_tcp................ok
t/30_loops/50_tk/wheel_sf_udp................ok
t/30_loops/50_tk/wheel_sf_unix...............ok
t/30_loops/50_tk/wheel_tail..................ok
t/90_regression/agaran-filter-httpd..........ok
t/90_regression/averell-callback-ret.........ok
t/90_regression/bingos-followtail............ok
t/90_regression/broeren-win32-nbio...........skipped
all skipped: This test examines ActiveState Perl behavior.
t/90_regression/cfedde-filter-httpd..........ok
t/90_regression/ferrari-server-unix..........ok
t/90_regression/merijn-sigchld-system........# Using '/bin/true' as our
thing to run under system()
ok
t/90_regression/neyuki_detach................ok
t/90_regression/rt14444-arg1.................ok
t/90_regression/rt1648-tied-stderr...........ok
t/90_regression/rt19908-merlyn-stop..........ok
t/90_regression/rt23181-sigchld-rc...........ok
t/90_regression/steinert-passed-wheel........ok
t/90_regression/steinert-signal-integrity....ok
t/90_regression/suzman_windows...............ok
t/90_regression/ton-stop-corruption..........ok
t/90_regression/whelan-dieprop...............ok
t/90_regression/whjackson-followtail.........ok
All tests successful, 34 tests and 19 subtests skipped.
Files=179, Tests=4837, 338 wallclock secs (97.90 cusr + 8.60 csys =
106.50 CPU)
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------- ---- -------
Carp 0 1.04
Errno 1.09 1.09_01
Ex****ter 0 5.58
File::Spec 0.87 3.2701
IO::Handle 1.27 1.27
POSIX 1.02 1.09
Socket 1.7 1.78
Storable 2.16 2.18
Test::Harness 2.26 2.64
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = de_DE.UTF-8
PATH =
/usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 25082
PERL5_CPAN_IS_RUNNING = 25082
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X =
/home/src/perl/repoperls/installed-perls/maint-5.8/pIS17Oa/perl-5.8.0@[EMAIL PROTECTED]
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.92_59
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.14
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51
ExtUtils::Par***S 2.19
File::Spec 3.2701
Module::Build 0.2808
Module::Signature 0.55
Test::Harness 2.64
Test::More 0.78
YAML 0.62
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.14, archname=i686-linux-64int
uname='linux k75 2.6.14 #1 fri jan 27 16:22:47 cet 2006 i686 gnulinux
'
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pIS17Oa/perl-5.8.0@[EMAIL PROTECTED]
-Uversiononly -Doptimize=-g -des -Duse64bitint
-Dusedevel'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef
usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -pipe
-Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-g',
cppflags='-DDEBUGGING -fno-strict-aliasing -pipe
-Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.0.3 20060304 (prerelease) (Debian
4.0.2-10)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8,
Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
|
