This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear KOKOGIKO,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sun Mar 23 04:51:30 2008] Trying to get
'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/K/KO/KOKOGIKO/Location-GeoTool-2.tar.gz'
[MSG] [Sun Mar 23 04:51:32 2008] Trying to get
'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/K/KO/KOKOGIKO/CHECKSUMS'
[MSG] [Sun Mar 23 04:51:33 2008] Checksum matches for
'Location-GeoTool-2.tar.gz'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location-GeoTool-2/'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location-GeoTool-2/t/'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/t/06_locapo_get.t'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/t/02_datum.t'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/t/07_locapo_create.t'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/t/05_gridlocator.t'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/t/04_dirstring.t'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/t/00_compile.t'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/t/01_format.t'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/t/03_direction.t'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location-GeoTool-2/Changes'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location-GeoTool-2/MANIFEST'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location-GeoTool-2/lib/'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool/'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool/Plugin/'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool/Plugin/GridLocator.pm'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool/Plugin/Locapoint.pm'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool/Japanese.pod'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool/Aura.pm'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool/Direction.pm'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool/Direction/'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool/Direction/Japanese.pod'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/lib/Location/GeoTool.pm'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location-GeoTool-2/pp****t.h'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location-GeoTool-2/META.yml'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location-GeoTool-2/GeoTool.xs'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted
'Location-GeoTool-2/Makefile.PL'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location-GeoTool-2/README'
[MSG] [Sun Mar 23 04:51:34 2008] Extracted 'Location::GeoTool' to
'/opt/perl/testers/.cpanplus/5.8.8/build/Location-GeoTool-2'
[MSG] [Sun Mar 23 04:51:34 2008] Testing if you have a C compiler
Checking if your kit is complete...
Looks good
Warning: prerequisite Math::Round 0 not found.
Writing Makefile for Location::GeoTool
[MSG] [Sun Mar 23 04:51:34 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Sun Mar 23 04:51:34 2008] Module 'Location::GeoTool' requires
'Math::Round' version '0' to be installed
[MSG] [Sun Mar 23 04:51:34 2008] Trying to get
'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/G/GR/GROMMEL/CHECKSUMS'
[MSG] [Sun Mar 23 04:51:35 2008] Checksum matches for
'Math-Round-0.06.tar.gz'
[MSG] [Sun Mar 23 04:51:35 2008] Extracted 'Math-Round-0.06/'
[MSG] [Sun Mar 23 04:51:35 2008] Extracted 'Math-Round-0.06/Changes'
[MSG] [Sun Mar 23 04:51:35 2008] Extracted 'Math-Round-0.06/Makefile.PL'
[MSG] [Sun Mar 23 04:51:35 2008] Extracted 'Math-Round-0.06/MANIFEST'
[MSG] [Sun Mar 23 04:51:35 2008] Extracted 'Math-Round-0.06/META.yml'
[MSG] [Sun Mar 23 04:51:35 2008] Extracted 'Math-Round-0.06/README'
[MSG] [Sun Mar 23 04:51:35 2008] Extracted 'Math-Round-0.06/Round.pm'
[MSG] [Sun Mar 23 04:51:35 2008] Extracted 'Math-Round-0.06/test.pl'
[MSG] [Sun Mar 23 04:51:35 2008] Extracted 'Math::Round' to
'/opt/perl/testers/.cpanplus/5.8.8/build/Math-Round-0.06'
[MSG] [Sun Mar 23 04:51:35 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Math::Round
[MSG] [Sun Mar 23 04:51:35 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Sun Mar 23 04:51:36 2008] cp Round.pm blib/lib/Math/Round.pm
AutoSplitting blib/lib/Math/Round.pm (blib/lib/auto/Math/Round)
Manifying blib/man3/Math::Round.3
[MSG] [Sun Mar 23 04:51:36 2008] MAKE TEST passed: 1..11
ok 1
round............ok 2
round_even.......ok 3
round_odd........ok 4
round_rand.......ok 5
nearest..........ok 6
nearest_ceil.....ok 7
nearest_floor....ok 8
nearest_rand.....ok 9
nlowmult.........ok 10
nhimult..........ok 11
All tests successful.
[MSG] [Sun Mar 23 04:51:36 2008] Sending test re****t for 'Math-Round-0.06'
[MSG] [Sun Mar 23 04:51:36 2008] Ok, not sending test re****t
[MSG] [Sun Mar 23 04:51:37 2008] cp
lib/Location/GeoTool/Direction/Japanese.pod
blib/lib/Location/GeoTool/Direction/Japanese.pod
cp lib/Location/GeoTool/Aura.pm blib/lib/Location/GeoTool/Aura.pm
cp lib/Location/GeoTool/Plugin/Locapoint.pm
blib/lib/Location/GeoTool/Plugin/Locapoint.pm
cp lib/Location/GeoTool.pm blib/lib/Location/GeoTool.pm
cp lib/Location/GeoTool/Direction.pm
blib/lib/Location/GeoTool/Direction.pm
cp lib/Location/GeoTool/Plugin/GridLocator.pm
blib/lib/Location/GeoTool/Plugin/GridLocator.pm
cp lib/Location/GeoTool/Japanese.pod
blib/lib/Location/GeoTool/Japanese.pod
Running Mkbootstrap for Location::GeoTool ()
Please specify prototyping behavior for GeoTool.xs (see perlxs manual)
In file included from GeoTool.xs:5:
pp****t.h:231:1: warning: "PERL_UNUSED_DECL" redefined
In file included from GeoTool.xs:2:
/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE/perl.h:163:1:
warning: this is the location of the previous definition
Manifying blib/man3/Location::GeoTool::Direction::Japanese.3
Manifying blib/man3/Location::GeoTool::Plugin::Locapoint.3
Manifying blib/man3/Location::GeoTool.3
Manifying blib/man3/Location::GeoTool::Plugin::GridLocator.3
Manifying blib/man3/Location::GeoTool::Direction.3
Manifying blib/man3/Location::GeoTool::Japanese.3
[ERROR] [Sun Mar 23 04:51:38 2008] MAKE TEST failed:
不希望的裝置輸出入控制 (ioctl) t/00_compile............ok
t/01_format.............
# Failed test at t/01_format.t line 40.
# got: '32.61608'
# expected: '32.61609'
# Looks like you failed 1 test of 393.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/393 subtests
t/02_datum..............ok
t/03_direction..........ok
t/04_dirstring..........ok
t/05_gridlocator........ok
t/06_locapo_get.........ok
t/07_locapo_create......ok
Test Summary Re****t
-------------------
t/01_format.t (Wstat: 256 Tests: 393 Failed: 1)
Failed test: 260
Non-zero exit status: 1
Files=8, Tests=544, 1 wallclock secs ( 0.18 usr 0.01 sys + 0.68 cusr
0.07 csys = 0.94 CPU)
Result: FAIL
Failed 1/8 test programs. 1/544 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Sun Mar 23 04:51:38 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Attribute::Handlers 0.78_02 0
Math::Round 0.06 0
Math::Trig 1.16 0
Test::More 0.78 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
|
