This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Patrick Galbraith,
This is a computer-generated re****t for DBD-mysql-3.0008
on perl 5.10.0, created by CPAN-Re****ter-1.12.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this re****t is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL re****ts for missing library
or binary dependencies, unsup****ted operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this re****t is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00base...............ok
t/10dsnlist............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/10dsnlist.t line
45
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 9/9 subtests
t/20createdrop.........DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/20createdrop.t
line 45
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 5/5 subtests
t/30insertfetch........DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/30insertfetch.t
line 48
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 11/11 subtests
t/35limit..............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/35limit.t line 50
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 113/113 subtests
t/35prepare............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/35prepare.t line
37
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 30/30 subtests
t/40bindparam..........DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/40bindparam.t line
64
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 28/28 subtests
t/40bindparam2.........DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/40bindparam2.t
line 64
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 13/13 subtests
t/40blobs..............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/40blobs.t line 64
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 11/11 subtests
t/40listfields.........DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/40listfields.t
line 57
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 18/18 subtests
t/40nulls..............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/40nulls.t line 50
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 11/11 subtests
t/40numrows............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/40numrows.t line
59
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 25/25 subtests
t/41bindparam..........DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/41bindparam.t line
37
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 11/11 subtests
t/41blobs_prepare......DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/41blobs_prepare.t
line 71
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 24/24 subtests
t/42bindparam..........DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/42bindparam.t line
37
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 11/11 subtests
t/50chopblanks.........DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/50chopblanks.t
line 57
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 35/35 subtests
t/50commit.............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/50commit.t line 64
Can't call method "tables" on an undefined value at t/lib.pl line 232.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 30/30 subtests
t/60leaks..............skipped: $ENV{SLOW_TESTS} is not set or
Proc::ProcessTable not installed
t/dbdadmin.............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/dbdadmin.t line 74
Cannot connect: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using
password: NO)
Either your server is not up and running or you have no
permissions for acessing the DSN DBI:mysql:test.
This test requires a running server and write permissions.
Please make sure your server is running and you have
permissions, then retry.
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 21/21 subtests
t/insertid.............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/insertid.t line 13
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests
t/param_values.........DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/param_values.t
line 16
Can't call method "tables" on an undefined value at t/lib.pl line 232.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 8/8 subtests
t/prepare_noerror......DBI connect('test;mysql_server_prepare=1','',...)
failed: Access denied for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO)
at t/prepare_noerror.t line 22
Can't call method "prepare" on an undefined value at t/prepare_noerror.t
line 25.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/texecute.............DBI connect('test','',...) failed: Access denied
for user 'imacat'@[EMAIL PROTECTED]
'localhost' (using password: NO) at t/texecute.t line 17
Can't call method "tables" on an undefined value at t/lib.pl line 232.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 9/9 subtests
Test Summary Re****t
-------------------
t/10dsnlist.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 9 tests but ran 1.
t/20createdrop.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 5 tests but ran 1.
t/30insertfetch.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 11 tests but ran 1.
t/35limit.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 113 tests but ran 1.
t/35prepare.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 30 tests but ran 0.
t/40bindparam.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 28 tests but ran 1.
t/40bindparam2.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 13 tests but ran 1.
t/40blobs.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 11 tests but ran 1.
t/40listfields.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 18 tests but ran 1.
t/40nulls.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 11 tests but ran 1.
t/40numrows.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 25 tests but ran 1.
t/41bindparam.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 11 tests but ran 0.
t/41blobs_prepare.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 24 tests but ran 1.
t/42bindparam.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 11 tests but ran 0.
t/50chopblanks.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 35 tests but ran 1.
t/50commit.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 30 tests but ran 1.
t/dbdadmin.t (Wstat: 2560 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 10
Parse errors: Bad plan. You planned 21 tests but ran 1.
t/insertid.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 12 tests but ran 0.
t/param_values.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 8 tests but ran 1.
t/prepare_noerror.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/texecute.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 9 tests but ran 1.
Files=23, Tests=21, 7 wallclock secs ( 0.08 usr 0.02 sys + 1.39 cusr
0.23 csys = 1.72 CPU)
Result: FAIL
Failed 21/23 test programs. 16/21 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------ ---- --------
Data::Dumper 0 2.121_14
DBI 1.08 1.602
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = zh_TW
LANGUAGE = zh_TW
LC_ALL = zh_TW
LC_COLLATE = zh_TW
LC_CTYPE = zh_TW
LC_MESSAGES = zh_TW
LC_MONETARY = zh_TW
LC_NUMERIC = zh_TW
LC_TIME = zh_TW
PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
PERL5LIB =
/home/imacat/.cpan/build/DBI-1.602-JKx7Wz/blib/arch:/home/imacat/.cpan/build/DBI-1.602-JKx7Wz/blib/lib:/home/imacat/.cpan/build/Email-Valid-0.179-4T3j6E/blib/arch:/home/imacat/.cpan/build/Email-Valid-0.179-4T3j6E/blib/lib:/home/imacat/.cpan/build/MailTools-2.02-ydMWAh/blib/arch:/home/imacat/.cpan/build/MailTools-2.02-ydMWAh/blib/lib:/home/imacat/.cpan/build/Test-Pod-1.26-zeigyt/blib/arch:/home/imacat/.cpan/build/Test-Pod-1.26-zeigyt/blib/lib:/home/imacat/.cpan/build/TimeDate-1.16-RrzW65/blib/arch:/home/imacat/.cpan/build/TimeDate-1.16-RrzW65/blib/lib:/home/imacat/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 21710
PERL5_CPAN_IS_RUNNING = 21710
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/zsh
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /opt/perl/5.10.0/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
$EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.9205
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.14
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::Par***S 2.19
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature 0.55
Test::Harness 3.10
Test::More 0.78
YAML 0.66
YAML::Syck n/a
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid
-Dinc_version_list=none -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing
-pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'
|
