This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear ELIZABETH,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Mar 21 02:58:16 2008] Trying to get
'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/E/EL/ELIZABETH/PerlIO-via-Rotate-0.06.tar.gz'
[MSG] [Fri Mar 21 02:58:18 2008] Trying to get
'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/E/EL/ELIZABETH/CHECKSUMS'
[MSG] [Fri Mar 21 02:58:20 2008] Checksum matches for
'PerlIO-via-Rotate-0.06.tar.gz'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted 'PerlIO-via-Rotate-0.06'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/CHANGELOG'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted 'PerlIO-via-Rotate-0.06/lib'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/lib/PerlIO'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/lib/PerlIO/via'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/lib/PerlIO/via/Rotate.pm'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/Makefile.PL'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/MANIFEST'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/META.yml'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted 'PerlIO-via-Rotate-0.06/README'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted 'PerlIO-via-Rotate-0.06/t'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/t/Rotate1.t'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/t/Rotate2.t'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/t/Rotate3.t'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/t/Rotate4.t'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted 'PerlIO-via-Rotate-0.06/TODO'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted
'PerlIO-via-Rotate-0.06/VERSION'
[MSG] [Fri Mar 21 02:58:20 2008] Extracted 'PerlIO::via::Rotate' to
'/opt/perl/testers/.cpanplus/5.8.8/build/PerlIO-via-Rotate-0.06'
[MSG] [Fri Mar 21 02:58:21 2008] Checking if your kit is complete...
Looks good
Writing Makefile for PerlIO::via::Rotate
[MSG] [Fri Mar 21 02:58:21 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Fri Mar 21 02:58:22 2008] cp lib/PerlIO/via/Rotate.pm
blib/lib/PerlIO/via/Rotate.pm
Manifying blib/man3/PerlIO::via::Rotate.3
[ERROR] [Fri Mar 21 02:58:22 2008] MAKE TEST failed:
不希望的裝置輸出入控制 (ioctl) t/Rotate1......ok
t/Rotate2......
# Failed test 'use PerlIO::via::Rotate;'
# at t/Rotate2.t line 19.
# Tried to use 'PerlIO::via::Rotate'.
# Error: PerlIO::via::Rotate version 13 required--this is only
version 0.06 at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
Cannot find package 'PerlIO::via::rot13' at t/Rotate2.t line 47.
# Failed test 'opening 'test.rot13' for writing'
# at t/Rotate2.t line 47.
print() on closed filehandle $out at t/Rotate2.t line 52.
# Failed test 'print to file'
# at t/Rotate2.t line 52.
# Failed test 'closing encoding handle'
# at t/Rotate2.t line 53.
# Failed test 'opening without layer'
# at t/Rotate2.t line 59.
readline() on closed filehandle $test at t/Rotate2.t line 60.
# Failed test 'check encoded content'
# at t/Rotate2.t line 60.
# got: undef
# expected: 'Guvf vf n grfg sbe ebgngrq grkg gung unf uneqyl nal
fcrpvny punenpgref va vg
# ohg juvpu vf abarguryrff na vaqvpngvba bs gur erny jbeyq.
#
# Jvgu ybat yvarf naq cnentencuf naq nyy gung fbeg bs guvatf.
#
# Naq fb ba naq fb ba.
# --
# Naq n fvtangher
# '
# Failed test 'close test handle'
# at t/Rotate2.t line 61.
Cannot find package 'rot13' at t/Rotate2.t line 67.
# Failed test 'opening 'test.rot13' for reading'
# at t/Rotate2.t line 67.
readline() on closed filehandle $in at t/Rotate2.t line 70.
# Failed test 'check decoding'
# at t/Rotate2.t line 70.
# got: ''
# expected: 'This is a test for rotated text that has hardly any
special characters in it
# but which is nonetheless an indication of the real world.
#
# With long lines and paragraphs and all that sort of things.
#
# And so on and so on.
# --
# And a signature
# '
# Failed test 'close decoding handle'
# at t/Rotate2.t line 71.
# Failed test 'remove test file 'test.rot13''
# at t/Rotate2.t line 75.
# Looks like you failed 11 tests of 11.
Dubious, test returned 11 (wstat 2816, 0xb00)
Failed 11/11 subtests
t/Rotate3......ok
t/Rotate4......
# Failed test 'use PerlIO::via::Rotate;'
# at t/Rotate4.t line 19.
# Tried to use 'PerlIO::via::Rotate'.
# Error: PerlIO::via::Rotate version 1 required--this is only version
0.06 at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
# Looks like you failed 1 test of 12.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/12 subtests
Test Summary Re****t
-------------------
t/Rotate2.t (Wstat: 2816 Tests: 11 Failed: 11)
Failed tests: 1-11
Non-zero exit status: 11
t/Rotate4.t (Wstat: 256 Tests: 12 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=4, Tests=45, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.16 cusr
0.02 csys = 0.19 CPU)
Result: FAIL
Failed 2/4 test programs. 12/45 subtests failed.
make: *** [test_dynamic] Error 1
[MSG] [Fri Mar 21 02:58:22 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
|
