This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Marc Mettes,
This is a computer-generated re****t for CAD-ProEngineer-0.02
on perl 5.10.0, created by CPAN-Re****ter-1.12.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this re****t is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL re****ts for missing library
or binary dependencies, unsup****ted operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this re****t is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make':
cp ProEngineer.pm blib/lib/CAD/ProEngineer.pm
AutoSplitting blib/lib/CAD/ProEngineer.pm (blib/lib/auto/CAD/ProEngineer)
cp interp.pl blib/lib/CAD/interp.pl
/opt/perl/5.10.0/bin/perl /opt/perl/5.10.0/lib/5.10.0/ExtUtils/xsubpp
-typemap /opt/perl/5.10.0/lib/5.10.0/ExtUtils/typemap ProEngineer.xs >
ProEngineer.xsc && mv ProEngineer.xsc ProEngineer.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3
-DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC
"-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE"
ProEngineer.c
ProEngineer.xs:15:24: error: ProToolkit.h: 沒有此一[EMAIL PROTECTED]
error: ProUtil.h: 沒有此一[EMAIL PROTECTED]
error: ProMenu.h: 沒有此一[EMAIL PROTECTED]
error: ProMenuBar.h: 沒有此一[EMAIL PROTECTED]
error: ProUICmd.h: 沒有此一[EMAIL PROTECTED]
error: ProParameter.h: 沒有此一[EMAIL PROTECTED]
error: ProDimension.h: 沒有此一[EMAIL PROTECTED]
error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'std_uiCmdAccessState_ACCESS_AVAILABLE'
ProEngineer.xs:109: error: expected ')' before 'command'
ProEngineer.xs:134: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'std_VisitAction'
ProEngineer.xs:211: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'std_VisitFilter'
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProMessageDisplay':
ProEngineer.xs:410: error: 'ProFileName' undeclared (first use in this
function)
ProEngineer.xs:410: error: (Each undeclared identifier is re****ted only
once
ProEngineer.xs:410: error: for each function it appears in.)
ProEngineer.xs:410: error: expected ';' before 'msg_file_wstr'
ProEngineer.xs:411: error: 'ProCharLine' undeclared (first use in this
function)
ProEngineer.xs:411: error: expected ';' before 'out_str'
ProEngineer.xs:412: error: 'ProLine' undeclared (first use in this
function)
ProEngineer.xs:412: error: expected ';' before 'out_wstr'
ProEngineer.xs:415: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:415: error: expected ';' before 'err'
ProEngineer.xs:504: error: 'msg_file_wstr' undeclared (first use in this
function)
ProEngineer.xs:507: error: 'err' undeclared (first use in this function)
ProEngineer.xs:507: error: 'out_wstr' undeclared (first use in this
function)
ProEngineer.xs:508: error: 'out_str' undeclared (first use in this
function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProMessageRead':
ProEngineer.xs:554: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:554: error: expected ';' before 'err'
ProEngineer.xs:602: error: 'err' undeclared (first use in this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProMessageNumRead':
ProEngineer.xs:647: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:647: error: expected ';' before 'err'
ProEngineer.xs:726: error: 'err' undeclared (first use in this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProMdlCurrentGet':
ProEngineer.xs:767: error: 'ProMdl' undeclared (first use in this
function)
ProEngineer.xs:767: error: expected ';' before 'model'
ProEngineer.xs:768: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:768: error: expected ';' before 'err'
ProEngineer.xs:782: error: 'err' undeclared (first use in this function)
ProEngineer.xs:782: error: 'model' undeclared (first use in this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProMdlInit':
ProEngineer.xs:810: error: 'ProMdl' undeclared (first use in this
function)
ProEngineer.xs:810: error: expected ';' before 'model'
ProEngineer.xs:811: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:811: error: expected ';' before 'err'
ProEngineer.xs:814: error: 'ProName' undeclared (first use in this
function)
ProEngineer.xs:814: error: expected ';' before 'name_wstr'
ProEngineer.xs:815: error: 'ProMdlType' undeclared (first use in this
function)
ProEngineer.xs:815: error: expected ';' before 'type'
ProEngineer.xs:836: error: 'name_wstr' undeclared (first use in this
function)
ProEngineer.xs:837: error: 'type' undeclared (first use in this function)
ProEngineer.xs:839: error: 'err' undeclared (first use in this function)
ProEngineer.xs:839: error: 'model' undeclared (first use in this function)
ProEngineer.xs:844: error: 'PRO_TK_NO_ERROR' undeclared (first use in this
function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProMdlNameGet':
ProEngineer.xs:871: error: 'ProMdl' undeclared (first use in this
function)
ProEngineer.xs:871: error: expected ';' before 'model'
ProEngineer.xs:872: error: 'ProCharName' undeclared (first use in this
function)
ProEngineer.xs:872: error: expected ';' before 'mdlname_str'
ProEngineer.xs:873: error: 'ProName' undeclared (first use in this
function)
ProEngineer.xs:873: error: expected ';' before 'mdlname_wstr'
ProEngineer.xs:874: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:874: error: expected ';' before 'err'
ProEngineer.xs:892: error: 'model' undeclared (first use in this function)
ProEngineer.xs:899: error: 'err' undeclared (first use in this function)
ProEngineer.xs:899: error: 'mdlname_wstr' undeclared (first use in this
function)
ProEngineer.xs:900: error: 'mdlname_str' undeclared (first use in this
function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProMdlTypeGet':
ProEngineer.xs:923: error: 'ProMdl' undeclared (first use in this
function)
ProEngineer.xs:923: error: expected ';' before 'model'
ProEngineer.xs:924: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:924: error: expected ';' before 'err'
ProEngineer.xs:949: error: 'model' undeclared (first use in this function)
ProEngineer.xs:958: error: 'err' undeclared (first use in this function)
ProEngineer.xs:976: error: 'ProBoolean' undeclared (first use in this
function)
ProEngineer.xs:976: error: expected expression before ')' token
ProEngineer.xs:980: error: 'ProMdlsubtype' undeclared (first use in this
function)
ProEngineer.xs:980: error: expected expression before ')' token
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProMdlDisplay':
ProEngineer.xs:1004: error: 'ProMdl' undeclared (first use in this
function)
ProEngineer.xs:1004: error: expected ';' before 'model'
ProEngineer.xs:1005: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1005: error: expected ';' before 'err'
ProEngineer.xs:1028: error: 'model' undeclared (first use in this
function)
ProEngineer.xs:1037: error: 'err' undeclared (first use in this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProMdlToModelitem':
ProEngineer.xs:1211: error: 'ProMdl' undeclared (first use in this
function)
ProEngineer.xs:1211: error: expected ';' before 'model'
ProEngineer.xs:1212: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1212: error: expected ';' before 'err'
ProEngineer.xs:1214: error: 'ProModelitem' undeclared (first use in this
function)
ProEngineer.xs:1214: error: 'modelitem' undeclared (first use in this
function)
ProEngineer.xs:1230: error: 'model' undeclared (first use in this
function)
ProEngineer.xs:1243: error: expected expression before ')' token
ProEngineer.xs:1244: error: 'err' undeclared (first use in this function)
ProEngineer.xs:1248: error: 'PRO_TK_NO_ERROR' undeclared (first use in
this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProModelitemInit':
ProEngineer.xs:1273: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1273: error: expected ';' before 'err'
ProEngineer.xs:1274: error: 'ProMdl' undeclared (first use in this
function)
ProEngineer.xs:1274: error: expected ';' before 'model'
ProEngineer.xs:1275: error: 'ProModelitem' undeclared (first use in this
function)
ProEngineer.xs:1275: error: 'ptr' undeclared (first use in this function)
ProEngineer.xs:1295: error: 'model' undeclared (first use in this
function)
ProEngineer.xs:1315: error: expected expression before ')' token
ProEngineer.xs:1316: error: expected expression before ')' token
ProEngineer.xs:1321: error: 'ProDimension' undeclared (first use in this
function)
ProEngineer.xs:1321: error: expected expression before ')' token
ProEngineer.xs:1341: error: 'err' undeclared (first use in this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProModelitemMdlGet':
ProEngineer.xs:1350: error: 'ProMdl' undeclared (first use in this
function)
ProEngineer.xs:1350: error: expected ';' before 'model'
ProEngineer.xs:1351: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1351: error: expected ';' before 'err'
ProEngineer.xs:1353: error: 'ProModelitem' undeclared (first use in this
function)
ProEngineer.xs:1353: error: 'modelitem' undeclared (first use in this
function)
ProEngineer.xs:1381: error: 'err' undeclared (first use in this function)
ProEngineer.xs:1381: error: 'model' undeclared (first use in this
function)
ProEngineer.xs:1386: error: 'PRO_TK_NO_ERROR' undeclared (first use in
this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProCmdActionAdd':
ProEngineer.xs:1468: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1468: error: expected ';' before 'err'
ProEngineer.xs:1471: error: 'uiCmdCmdId' undeclared (first use in this
function)
ProEngineer.xs:1471: error: expected ';' before 'cmd_id'
ProEngineer.xs:1509: error: 'ACCESS_AVAILABLE' undeclared (first use in
this function)
ProEngineer.xs:1511: error: 'std_uiCmdAccessState_ACCESS_AVAILABLE'
undeclared (first use in this function)
ProEngineer.xs:1515: error: 'err' undeclared (first use in this function)
ProEngineer.xs:1515: error: 'uiCmdCmdActFn' undeclared (first use in this
function)
ProEngineer.xs:1515: error: expected ')' before 'std_uiCmdCmdActFn'
ProEngineer.xs:1520: error: 'cmd_id' undeclared (first use in this
function)
ProEngineer.xs: In function
'XS_CAD__ProEngineer_ProMenubarmenuPushbuttonAdd':
ProEngineer.xs:1548: error: 'uiCmdCmdId' undeclared (first use in this
function)
ProEngineer.xs:1548: error: expected ';' before 'cmd_id'
ProEngineer.xs:1549: error: 'ProFileName' undeclared (first use in this
function)
ProEngineer.xs:1549: error: expected ';' before 'msg_file_wstr'
ProEngineer.xs:1550: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1550: error: expected ';' before 'err'
ProEngineer.xs:1573: error: 'cmd_id' undeclared (first use in this
function)
ProEngineer.xs:1574: error: 'msg_file_wstr' undeclared (first use in this
function)
ProEngineer.xs:1577: error: 'err' undeclared (first use in this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProParameterInit':
ProEngineer.xs:1590: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1590: error: expected ';' before 'err'
ProEngineer.xs:1592: error: 'ProModelitem' undeclared (first use in this
function)
ProEngineer.xs:1592: error: 'modelitem' undeclared (first use in this
function)
ProEngineer.xs:1593: error: 'ProParameter' undeclared (first use in this
function)
ProEngineer.xs:1593: error: 'parameter' undeclared (first use in this
function)
ProEngineer.xs:1594: error: 'ProName' undeclared (first use in this
function)
ProEngineer.xs:1594: error: expected ';' before 'w_name'
ProEngineer.xs:1624: error: 'w_name' undeclared (first use in this
function)
ProEngineer.xs:1626: error: expected expression before ')' token
ProEngineer.xs:1627: error: 'err' undeclared (first use in this function)
ProEngineer.xs:1631: error: 'PRO_TK_NO_ERROR' undeclared (first use in
this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProParameterValueGet':
ProEngineer.xs:1658: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1658: error: expected ';' before 'err'
ProEngineer.xs:1659: error: 'ProParameter' undeclared (first use in this
function)
ProEngineer.xs:1659: error: 'parameter' undeclared (first use in this
function)
ProEngineer.xs:1660: error: 'ProParamvalue' undeclared (first use in this
function)
ProEngineer.xs:1660: error: 'paramval' undeclared (first use in this
function)
ProEngineer.xs:1689: error: expected expression before ')' token
ProEngineer.xs:1690: error: 'err' undeclared (first use in this function)
ProEngineer.xs:1694: error: 'PRO_TK_NO_ERROR' undeclared (first use in
this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProParameterNameGet':
ProEngineer.xs:1721: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1721: error: expected ';' before 'err'
ProEngineer.xs:1722: error: 'ProParameter' undeclared (first use in this
function)
ProEngineer.xs:1722: error: 'parameter' undeclared (first use in this
function)
ProEngineer.xs:1723: error: 'ProCharName' undeclared (first use in this
function)
ProEngineer.xs:1723: error: expected ';' before 'name'
ProEngineer.xs:1753: error: 'name' undeclared (first use in this function)
ProEngineer.xs:1755: error: 'err' undeclared (first use in this function)
ProEngineer.xs:1755: error: 'PRO_TK_NO_ERROR' undeclared (first use in
this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProParamvalueValueGet':
ProEngineer.xs:1777: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1777: error: expected ';' before 'err'
ProEngineer.xs:1778: error: 'ProParamvalue' undeclared (first use in this
function)
ProEngineer.xs:1778: error: 'paramval' undeclared (first use in this
function)
ProEngineer.xs:1780: error: 'ProParamvalueValue' undeclared (first use in
this function)
ProEngineer.xs:1780: error: expected ';' before 'value'
ProEngineer.xs:1781: error: 'ProParamvalueType' undeclared (first use in
this function)
ProEngineer.xs:1781: error: expected ';' before 'value_type'
ProEngineer.xs:1782: error: 'ProCharLine' undeclared (first use in this
function)
ProEngineer.xs:1782: error: expected ';' before 'str_value'
ProEngineer.xs:1811: error: 'value_type' undeclared (first use in this
function)
ProEngineer.xs:1813: error: 'err' undeclared (first use in this function)
ProEngineer.xs:1813: error: 'value' undeclared (first use in this
function)
ProEngineer.xs:1814: error: 'PRO_PARAM_DOUBLE' undeclared (first use in
this function)
ProEngineer.xs:1817: error: 'PRO_PARAM_STRING' undeclared (first use in
this function)
ProEngineer.xs:1818: error: 'str_value' undeclared (first use in this
function)
ProEngineer.xs:1821: error: 'PRO_PARAM_INTEGER' undeclared (first use in
this function)
ProEngineer.xs:1824: error: 'PRO_PARAM_BOOLEAN' undeclared (first use in
this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_std_VisitFunction':
ProEngineer.xs:1855: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1855: error: expected ';' before 'err'
ProEngineer.xs:1880: error: 'PRO_TK_BAD_INPUTS' undeclared (first use in
this function)
ProEngineer.xs:1947: error: 'err' undeclared (first use in this function)
ProEngineer.xs:1947: error: 'ProModelitem' undeclared (first use in this
function)
ProEngineer.xs:1947: error: expected expression before ')' token
ProEngineer.xs:1952: error: 'ProSolid' undeclared (first use in this
function)
ProEngineer.xs:1952: error: expected ')' before 'owner'
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProDimensionValueGet':
ProEngineer.xs:1966: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:1966: error: expected ';' before 'err'
ProEngineer.xs:1967: error: 'ProDimension' undeclared (first use in this
function)
ProEngineer.xs:1967: error: 'dim' undeclared (first use in this function)
ProEngineer.xs:1984: error: 'PRO_TK_BAD_INPUTS' undeclared (first use in
this function)
ProEngineer.xs:1987: error: 'err' undeclared (first use in this function)
ProEngineer.xs: In function 'XS_CAD__ProEngineer_ProDimensionSymbolGet':
ProEngineer.xs:2010: error: 'ProError' undeclared (first use in this
function)
ProEngineer.xs:2010: error: expected ';' before 'err'
ProEngineer.xs:2011: error: 'ProDimension' undeclared (first use in this
function)
ProEngineer.xs:2011: error: 'dim' undeclared (first use in this function)
ProEngineer.xs:2013: error: 'ProName' undeclared (first use in this
function)
ProEngineer.xs:2013: error: expected ';' before 'w_name'
ProEngineer.xs:2014: error: 'ProCharName' undeclared (first use in this
function)
ProEngineer.xs:2014: error: expected ';' before 'name'
ProEngineer.xs:2029: error: 'PRO_TK_BAD_INPUTS' undeclared (first use in
this function)
ProEngineer.xs:2032: error: 'err' undeclared (first use in this function)
ProEngineer.xs:2032: error: 'w_name' undeclared (first use in this
function)
ProEngineer.xs:2033: error: 'name' undeclared (first use in this function)
ProEngineer.c: In function 'boot_CAD__ProEngineer':
ProEngineer.c:2541: error: 'PRO_TK_NOT_EXIST' undeclared (first use in
this function)
ProEngineer.c:2544: error: 'PRO_TK_CRE_VIEW_BAD_EXPLODE' undeclared (first
use in this function)
ProEngineer.c:2547: error: 'PRO_TK_MSG_TOO_LONG' undeclared (first use in
this function)
ProEngineer.c:2550: error: 'PRO_TK_INVALID_MATRIX' undeclared (first use
in this function)
ProEngineer.c:2553: error: 'PRO_TK_BSPL_MULTI_INNER_KNOTS' undeclared
(first use in this function)
ProEngineer.c:2556: error: 'PRO_TK_NO_ERROR' undeclared (first use in this
function)
ProEngineer.c:2559: error: 'PRO_TK_E_FOUND' undeclared (first use in this
function)
ProEngineer.c:2562: error: 'PRO_TK_REGEN_AGAIN' undeclared (first use in
this function)
ProEngineer.c:2565: error: 'PRO_TK_UNATTACHED_FEATS' undeclared (first use
in this function)
ProEngineer.c:2568: error: 'PRO_TK_CANT_ACCESS' undeclared (first use in
this function)
ProEngineer.c:2571: error: 'PRO_TK_CANT_WRITE' undeclared (first use in
this function)
ProEngineer.c:2574: error: 'PRO_TK_NOT_IMPLEMENTED' undeclared (first use
in this function)
ProEngineer.c:2577: error: 'PRO_TK_INVALID_FILE' undeclared (first use in
this function)
ProEngineer.c:2580: error: 'PRO_TK_BAD_DIM_ATTACH' undeclared (first use
in this function)
ProEngineer.c:2583: error: 'PRO_TK_MSG_NOT_FOUND' undeclared (first use in
this function)
ProEngineer.c:2586: error: 'PRO_TK_E_DEADLOCK' undeclared (first use in
this function)
ProEngineer.c:2589: error: 'PRO_TK_BAD_INPUTS' undeclared (first use in
this function)
ProEngineer.c:2592: error: 'PRO_TK_EMPTY' undeclared (first use in this
function)
ProEngineer.c:2595: error: 'PRO_TK_E_IN_USE' undeclared (first use in this
function)
ProEngineer.c:2598: error: 'PRO_TK_NO_COORD_SYSTEM' undeclared (first use
in this function)
ProEngineer.c:2601: error: 'PRO_TK_OBSOLETE_FUNC' undeclared (first use in
this function)
ProEngineer.c:2604: error: 'PRO_TK_ABORT' undeclared (first use in this
function)
ProEngineer.c:2607: error: 'PRO_TK_MSG_USER_QUIT' undeclared (first use in
this function)
ProEngineer.c:2610: error: 'PRO_TK_USER_ABORT' undeclared (first use in
this function)
ProEngineer.c:2613: error: 'PRO_TK_BAD_CONTEXT' undeclared (first use in
this function)
ProEngineer.c:2616: error: 'PRO_TK_LINE_TOO_LONG' undeclared (first use in
this function)
ProEngineer.c:2619: error: 'PRO_TK_NO_CHANGE' undeclared (first use in
this function)
ProEngineer.c:2622: error: 'PRO_TK_MSG_NO_TRANS' undeclared (first use in
this function)
ProEngineer.c:2625: error: 'PRO_TK_CRE_VIEW_BAD_TYPE' undeclared (first
use in this function)
ProEngineer.c:2628: error: 'PRO_TK_UNAV_SEC' undeclared (first use in this
function)
ProEngineer.c:2631: error: 'PRO_TK_INVALID_TYPE' undeclared (first use in
this function)
ProEngineer.c:2634: error: 'PRO_TK_CANT_MODIFY' undeclared (first use in
this function)
ProEngineer.c:2637: error: 'PRO_TK_CHECKOUT_CONFLICT' undeclared (first
use in this function)
ProEngineer.c:2640: error: 'PRO_TK_INVALID_PTR' undeclared (first use in
this function)
ProEngineer.c:2643: error: 'PRO_TK_CONTINUE' undeclared (first use in this
function)
ProEngineer.c:2646: error: 'PRO_TK_BSPL_UNSUITABLE_DEGREE' undeclared
(first use in this function)
ProEngineer.c:2649: error: 'PRO_TK_E_NOT_FOUND' undeclared (first use in
this function)
ProEngineer.c:2652: error: 'PRO_TK_INVALID_DIR' undeclared (first use in
this function)
ProEngineer.c:2655: error: 'PRO_TK_CRE_VIEW_BAD_PARENT' undeclared (first
use in this function)
ProEngineer.c:2658: error: 'PRO_TK_E_BUSY' undeclared (first use in this
function)
ProEngineer.c:2661: error: 'PRO_TK_INVALID_NAME' undeclared (first use in
this function)
ProEngineer.c:2664: error: 'PRO_TK_E_AMBIGUOUS' undeclared (first use in
this function)
ProEngineer.c:2667: error: 'PRO_TK_PICK_ABOVE' undeclared (first use in
this function)
ProEngineer.c:2670: error: 'PRO_TK_CRE_VIEW_BAD_SHEET' undeclared (first
use in this function)
ProEngineer.c:2673: error: 'PRO_TK_BAD_SRF_CRV' undeclared (first use in
this function)
ProEngineer.c:2676: error: 'PRO_TK_CRE_VIEW_BAD_MODEL' undeclared (first
use in this function)
ProEngineer.c:2679: error: 'PRO_TK_SUPP_PARENTS' undeclared (first use in
this function)
ProEngineer.c:2682: error: 'PRO_TK_BSPL_NON_STD_END_KNOTS' undeclared
(first use in this function)
ProEngineer.c:2685: error: 'PRO_TK_NO_LICENSE' undeclared (first use in
this function)
ProEngineer.c:2688: error: 'PRO_TK_MSG_FMT_ERROR' undeclared (first use in
this function)
ProEngineer.c:2691: error: 'PRO_TK_OUT_OF_MEMORY' undeclared (first use in
this function)
ProEngineer.c:2694: error: 'PRO_TK_INVALID_ITEM' undeclared (first use in
this function)
ProEngineer.c:2697: error: 'PRO_TK_COMM_ERROR' undeclared (first use in
this function)
ProEngineer.c:2700: error: 'PRO_TK_CANT_OPEN' undeclared (first use in
this function)
ProEngineer.c:2703: error: 'PRO_TK_NOT_DISPLAYED' undeclared (first use in
this function)
ProEngineer.c:2706: error: 'PRO_TK_GENERAL_ERROR' undeclared (first use in
this function)
ProEngineer.c:2709: error: 'PRO_TK_NOT_VALID' undeclared (first use in
this function)
ProEngineer.c:2712: error: 'PRO_TK_DWGCREATE_ERRORS' undeclared (first use
in this function)
ProEngineer.c:2715: error: 'PRO_MDL_2DSECTION' undeclared (first use in
this function)
ProEngineer.c:2718: error: 'PRO_MDL_UNUSED' undeclared (first use in this
function)
ProEngineer.c:2721: error: 'PRO_MDL_PART' undeclared (first use in this
function)
ProEngineer.c:2724: error: 'PRO_MDL_DIAGRAM' undeclared (first use in this
function)
ProEngineer.c:2727: error: 'PRO_MDL_ASSEMBLY' undeclared (first use in
this function)
ProEngineer.c:2730: error: 'PRO_MDL_MARKUP' undeclared (first use in this
function)
ProEngineer.c:2733: error: 'PRO_MDL_DRAWING' undeclared (first use in this
function)
ProEngineer.c:2736: error: 'PRO_MDL_3DSECTION' undeclared (first use in
this function)
ProEngineer.c:2742: error: 'PRO_MDL_DWGFORM' undeclared (first use in this
function)
ProEngineer.c:2745: error: 'PRO_MDL_LAYOUT' undeclared (first use in this
function)
ProEngineer.c:2748: error: 'PRO_MDL_MFG' undeclared (first use in this
function)
ProEngineer.c:2751: error: 'PRO_MDL_RE****T' undeclared (first use in this
function)
ProEngineer.c:2757: error: 'PROMDLSTYPE_OLD_REG_MFG' undeclared (first use
in this function)
ProEngineer.c:2760: error: 'PROMDLSTYPE_ASM_PROCPLAN' undeclared (first
use in this function)
ProEngineer.c:2763: error: 'PROMDLSTYPE_MFG_NCASM' undeclared (first use
in this function)
ProEngineer.c:2766: error: 'PROMDLSTYPE_MFG_MOLD' undeclared (first use in
this function)
ProEngineer.c:2769: error: 'PROMDLSTYPE_MFG_CMM' undeclared (first use in
this function)
ProEngineer.c:2772: error: 'PROMDLSTYPE_ASM_CLASS_CAV' undeclared (first
use in this function)
ProEngineer.c:2775: error: 'PROMDLSTYPE_REGEN_BACKUP' undeclared (first
use in this function)
ProEngineer.c:2778: error: 'PROMDLSTYPE_MFG_DIEFACE' undeclared (first use
in this function)
ProEngineer.c:2781: error: 'PROMDLSTYPE_MFG_NCPART' undeclared (first use
in this function)
ProEngineer.c:2784: error: 'PROMDLSTYPE_ASM_DESIGN' undeclared (first use
in this function)
ProEngineer.c:2787: error: 'PROMDLSTYPE_MFG_PROCPLAN' undeclared (first
use in this function)
ProEngineer.c:2790: error: 'PROMDLSTYPE_ASM_VERIFY' undeclared (first use
in this function)
ProEngineer.c:2793: error: 'PROMDLSTYPE_ASM_INTCHG_FUNC' undeclared (first
use in this function)
ProEngineer.c:2796: error: 'PROMDLSTYPE_PART_SHEETMETAL' undeclared (first
use in this function)
ProEngineer.c:2799: error: 'PROMDLSTYPE_ASM_NCMODEL' undeclared (first use
in this function)
ProEngineer.c:2802: error: 'PROMDLSTYPE_NONE' undeclared (first use in
this function)
ProEngineer.c:2805: error: 'PROMDLSTYPE_MFG_SHEETMETAL' undeclared (first
use in this function)
ProEngineer.c:2808: error: 'PROMDLSTYPE_PART_CONCEPT_MODEL' undeclared
(first use in this function)
ProEngineer.c:2811: error: 'PROMDLSTYPE_ASM_INTERCHANGE' undeclared (first
use in this function)
ProEngineer.c:2814: error: 'PROMDLSTYPE_PART_COMPOSITE' undeclared (first
use in this function)
ProEngineer.c:2817: error: 'PROMDLSTYPE_PART_SOLID' undeclared (first use
in this function)
ProEngineer.c:2820: error: 'PROMDLSTYPE_MFG_HARNESS' undeclared (first use
in this function)
ProEngineer.c:2823: error: 'PROMDLSTYPE_MFG_CAST' undeclared (first use in
this function)
ProEngineer.c:2826: error: 'PROMDLSTYPE_ASM_CLASS_SCAN_SET' undeclared
(first use in this function)
ProEngineer.c:2829: error: 'PROMDLSTYPE_MFG_EXPMACH' undeclared (first use
in this function)
ProEngineer.c:2832: error: 'PROMDLSTYPE_BULK' undeclared (first use in
this function)
ProEngineer.c:2835: error: 'PROMDLSTYPE_ASM_INTCHG_SUBST' undeclared
(first use in this function)
ProEngineer.c:2844: error: 'PRO_B_TRUE' undeclared (first use in this
function)
ProEngineer.c:2847: error: 'PRO_B_FALSE' undeclared (first use in this
function)
ProEngineer.c:2853: error: 'uiCmdPrioDefault' undeclared (first use in
this function)
ProEngineer.c:2856: error: 'uiProe2ndImmediate' undeclared (first use in
this function)
ProEngineer.c:2859: error: 'uiProe3rdImmediate' undeclared (first use in
this function)
ProEngineer.c:2862: error: 'uiProeImmediate' undeclared (first use in this
function)
ProEngineer.c:2865: error: 'uiCmdNoPriority' undeclared (first use in this
function)
ProEngineer.c:2868: error: 'uiProeAsynch' undeclared (first use in this
function)
ProEngineer.c:2874: error: 'ACCESS_UNAVAILABLE' undeclared (first use in
this function)
ProEngineer.c:2877: error: 'ACCESS_AVAILABLE' undeclared (first use in
this function)
ProEngineer.c:2880: error: 'ACCESS_REMOVE' undeclared (first use in this
function)
ProEngineer.c:2883: error: 'ACCESS_DISALLOW' undeclared (first use in this
function)
ProEngineer.c:2886: error: 'ACCESS_INVISIBLE' undeclared (first use in
this function)
make: *** [ProEngineer.o] Error 1
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = zh_TW
LANGUAGE = zh_TW
LC_ALL = zh_TW
LC_COLLATE = zh_TW
LC_CTYPE = zh_TW
LC_MESSAGES = zh_TW
LC_MONETARY = zh_TW
LC_NUMERIC = zh_TW
LC_TIME = zh_TW
PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
PERL5LIB = /home/imacat/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 28890
PERL5_CPAN_IS_EXECUTING =
/home/imacat/.cpan/build/CAD-ProEngineer-0.02-yYwBYf/Makefile.PL
PERL5_CPAN_IS_RUNNING = 28890
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/zsh
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /opt/perl/5.10.0/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
$EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.9205
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.14
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::Par***S 2.19
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature 0.55
Test::Harness 3.10
Test::More 0.78
YAML 0.66
YAML::Syck n/a
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid
-Dinc_version_list=none -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing
-pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'
|
