This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Michael Robinton,
This is a computer-generated re****t for LaBrea-Tarpit-1.33
on perl 5.10.0, created by CPAN-Re****ter-1.11.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this re****t is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL re****ts for missing library
or binary dependencies, unsup****ted operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this re****t is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
make[1]: Entering directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld'
make[1]: Leaving directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld'
make[1]: Entering directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/Get'
make[1]: Leaving directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/Get'
make[1]: Entering directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/Re****t'
make[1]: Leaving directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/Re****t'
make[1]: Entering directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/Util'
make[1]: Leaving directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/Util'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/append_open...........ok
t/cull_threads..........ok
t/daemon_handler........ok
t/d****eld...............ok
t/fetch.................ok
t/find_old_threads......ok
t/log2_mem..............ok
t/****t_stats............ok
t/prep_re****t...........ok
t/process_log...........ok
t/reap_kids.............ok
t/util..................ok
t/write_restore.........ok
All tests successful.
Files=13, Tests=663, 12 wallclock secs ( 0.11 usr 0.00 sys + 0.38 cusr
0.07 csys = 0.56 CPU)
Result: PASS
make[1]: Entering directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/chk_config......Can't locate Net/Netmask.pm in @[EMAIL PROTECTED]
(@[EMAIL PROTECTED]
contains:
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/lib
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/arch
/home/imacat/lib/perl5
/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld
/opt/perl/5.10.0/lib/5.10.0
/opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld
/opt/perl/5.10.0/lib/site_perl/5.10.0 .) at
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/lib/LaBrea/Tarpit/D****eld.pm
line 9.
BEGIN failed--compilation aborted at
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/lib/LaBrea/Tarpit/D****eld.pm
line 9.
Compilation failed in require at t/chk_config.t line 14.
BEGIN failed--compilation aborted at t/chk_config.t line 14.
Dubious, test returned 2 (wstat 512, 0x200)
Failed 24/24 subtests
t/deliver.........Can't locate Net/Netmask.pm in @[EMAIL PROTECTED]
(@[EMAIL PROTECTED]
contains:
blib/arch blib/lib ../ ../blib/lib ../blib/arch
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/lib
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/arch
/home/imacat/lib/perl5
/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld
/opt/perl/5.10.0/lib/5.10.0
/opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld
/opt/perl/5.10.0/lib/site_perl/5.10.0 .) at
../blib/lib/LaBrea/Tarpit/D****eld.pm line 9.
BEGIN failed--compilation aborted at ../blib/lib/LaBrea/Tarpit/D****eld.pm
line 9.
Compilation failed in require at t/deliver.t line 15.
BEGIN failed--compilation aborted at t/deliver.t line 15.
Dubious, test returned 2 (wstat 512, 0x200)
Failed 10/10 subtests
t/move2_Q.........Can't locate Net/Netmask.pm in @[EMAIL PROTECTED]
(@[EMAIL PROTECTED]
contains:
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/lib
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/arch
/home/imacat/lib/perl5
/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld
/opt/perl/5.10.0/lib/5.10.0
/opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld
/opt/perl/5.10.0/lib/site_perl/5.10.0 .) at
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/lib/LaBrea/Tarpit/D****eld.pm
line 9.
BEGIN failed--compilation aborted at
/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld/../blib/lib/LaBrea/Tarpit/D****eld.pm
line 9.
Compilation failed in require at t/move2_Q.t line 14.
BEGIN failed--compilation aborted at t/move2_Q.t line 14.
Dubious, test returned 2 (wstat 512, 0x200)
Failed 18/18 subtests
Test Summary Re****t
-------------------
t/chk_config.t (Wstat: 512 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 2
Parse errors: Bad plan. You planned 24 tests but ran 1.
t/deliver.t (Wstat: 512 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 2
Parse errors: Bad plan. You planned 10 tests but ran 1.
t/move2_Q.t (Wstat: 512 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 2
Parse errors: Bad plan. You planned 18 tests but ran 1.
Files=3, Tests=3, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.03 cusr
0.03 csys = 0.09 CPU)
Result: FAIL
Failed 3/3 test programs. 3/3 subtests failed.
make[1]: *** [test_dynamic] Error 2
make[1]: Leaving directory
`/home/imacat/.cpan/build/LaBrea-Tarpit-1.33-Yta8vw/D****eld'
make: *** [subdirs-test] Error 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = zh_TW
LANGUAGE = zh_TW
LC_ALL = zh_TW
LC_COLLATE = zh_TW
LC_CTYPE = zh_TW
LC_MESSAGES = zh_TW
LC_MONETARY = zh_TW
LC_NUMERIC = zh_TW
LC_TIME = zh_TW
PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
PERL5LIB = /home/imacat/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 14478
PERL5_CPAN_IS_RUNNING = 14478
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/zsh
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /opt/perl/5.10.0/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
$EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.9205
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.13
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::Par***S 2.19
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature 0.55
Test::Harness 3.10
Test::More 0.78
YAML 0.66
YAML::Syck n/a
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid
-Dinc_version_list=none -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing
-pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'
|
