This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear SIMONW,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Mar 14 00:10:25 2008] Trying to get
'http://www.cpan.org/authors/id/S/SI/SIMONW/CHECKSUMS'
[MSG] [Fri Mar 14 00:10:27 2008] Checksum matches for
'File-Binary-1.5.tar.gz'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/t/'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/Changes'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/README'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/lib/'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/Makefile.PL'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/MANIFEST'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/META.yml'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/lib/File/'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/lib/File/Binary.pm'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/be.fibonacci.u8.ints'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/26factorial.p32.ints.le.t'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/15power10.u32.ints.be.t'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted 'File-Binary-1.5/t/00seek.t'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/36fibonacci.p16.ints.le.t'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/10power10.u8.ints.be.t'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/be.power3.u16.ints'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/le.special.p32.ints'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/be.special.u16.ints'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/25factorial.u16.ints.le.t'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/be.power3.n16.ints'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/le.power10.n8.ints'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/05power3.p8.ints.le.t'
[MSG] [Fri Mar 14 00:10:28 2008] Extracted
'File-Binary-1.5/t/06power3.u32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power10.n16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.factorial.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/01power3.u8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/02power3.n32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power3.u8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.factorial.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted 'File-Binary-1.5/t/gentests'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power10.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power10.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/04power3.n8.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power3.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.fibonacci.n16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/24factorial.u32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/17power10.p32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/07power3.u16.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.factorial.p32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/19factorial.u8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.fibonacci.n8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/06power3.u32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/29fibonacci.n32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/22factorial.n8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/27factorial.p16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/35fibonacci.p32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power3.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.factorial.p32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.factorial.n16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/15power10.u32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/13power10.n8.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/16power10.u16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power10.n16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.special.p32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/28fibonacci.u8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.factorial.n16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power3.p32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.special.u32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/08power3.p32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/25factorial.u16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.special.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power10.u16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/23factorial.p8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/08power3.p32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/10power10.u8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.fibonacci.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/18power10.p16.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/24factorial.u32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.fibonacci.p32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/34fibonacci.u16.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/21factorial.n16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power3.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/02power3.n32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.fibonacci.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/30fibonacci.n16.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/14power10.p8.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power10.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.fibonacci.n16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/33fibonacci.u32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power10.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.factorial.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/16power10.u16.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power10.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/23factorial.p8.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power10.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.fibonacci.u8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power3.u16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power3.u32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power10.n8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.factorial.n8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/27factorial.p16.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.factorial.u16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.special.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/26factorial.p32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/30fibonacci.n16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/09power3.p16.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/03power3.n16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.special.u8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.fibonacci.u32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.factorial.n8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.factorial.u8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.factorial.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.factorial.u16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power3.u32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power3.n8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/32fibonacci.p8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power3.p32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/13power10.n8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power3.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.fibonacci.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/31fibonacci.n8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.factorial.u8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/33fibonacci.u32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power3.n8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.factorial.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/32fibonacci.p8.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power10.p32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.factorial.u32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/28fibonacci.u8.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.special.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.fibonacci.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/29fibonacci.n32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.special.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power10.u32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power10.p32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.special.n8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/11power10.n32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power3.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/17power10.p32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.special.n16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power3.n16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/19factorial.u8.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.special.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power3.u8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.fibonacci.p32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power10.u32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power3.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/21factorial.n16.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.fibonacci.n32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/36fibonacci.p16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/11power10.n32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.factorial.u32.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.special.u16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/18power10.p16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.power10.u8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.special.n8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.power10.u16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/12power10.n16.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/07power3.u16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/34fibonacci.u16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/05power3.p8.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.factorial.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/20factorial.n32.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.fibonacci.u16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/04power3.n8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.special.n16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.special.p16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/35fibonacci.p32.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/14power10.p8.ints.le.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/22factorial.n8.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/09power3.p16.ints.be.t'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/be.fibonacci.p8.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/le.fibonacci.u16.ints'
[MSG] [Fri Mar 14 00:10:29 2008] Extracted
'File-Binary-1.5/t/12power10.n16.ints.be.t'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted
'File-Binary-1.5/t/le.special.u32.ints'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted
'File-Binary-1.5/t/01power3.u8.ints.be.t'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted
'File-Binary-1.5/t/20factorial.n32.ints.be.t'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted
'File-Binary-1.5/t/le.power10.u8.ints'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted
'File-Binary-1.5/t/le.special.u8.ints'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted
'File-Binary-1.5/t/be.fibonacci.u32.ints'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted
'File-Binary-1.5/t/le.fibonacci.n8.ints'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted
'File-Binary-1.5/t/03power3.n16.ints.le.t'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted
'File-Binary-1.5/t/31fibonacci.n8.ints.be.t'
[MSG] [Fri Mar 14 00:10:30 2008] Extracted 'File::Binary' to
'/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5'
[MSG] [Fri Mar 14 00:10:31 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite IO::Scalar 0 not found.
Writing Makefile for File::Binary
[MSG] [Fri Mar 14 00:10:31 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Fri Mar 14 00:10:31 2008] Module 'File::Binary' requires
'IO::Scalar' version '0' to be installed
[MSG] [Fri Mar 14 00:10:31 2008] Trying to get
'http://www.cpan.org/authors/id/D/DS/DSKOLL/CHECKSUMS'
[MSG] [Fri Mar 14 00:10:31 2008] Checksum matches for
'IO-stringy-2.110.tar.gz'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/examples/'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/examples/IO_Scalar_synopsis'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/lib/'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/lib/IO/'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/lib/IO/Stringy.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/lib/IO/AtomicFile.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/lib/IO/Scalar.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/lib/IO/WrapTie.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/lib/IO/Lines.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/lib/IO/ScalarArray.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/lib/IO/Wrap.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/lib/IO/InnerFile.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/t/'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/t/two.t'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/t/IO_ScalarArray.t'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/t/simple.t'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/t/ExtUtils/'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/t/ExtUtils/TBone.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/t/Common.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/t/IO_Scalar.t'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/t/IO_Lines.t'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/t/IO_WrapTie.t'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/COPYING'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/contrib/'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted
'IO-stringy-2.110/contrib/Clever.pm'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/MANIFEST'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/META.yml'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/README'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO-stringy-2.110/Makefile.PL'
[MSG] [Fri Mar 14 00:10:32 2008] Extracted 'IO::Scalar' to
'/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-stringy-2.110'
[MSG] [Fri Mar 14 00:10:33 2008] Writing Makefile for IO::Stringy
[MSG] [Fri Mar 14 00:10:33 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Fri Mar 14 00:10:34 2008] Manifying blib/man3/IO::Lines.3
Manifying blib/man3/IO::WrapTie.3
Manifying blib/man3/IO::ScalarArray.3
Manifying blib/man3/IO::Wrap.3
Manifying blib/man3/IO::AtomicFile.3
Manifying blib/man3/IO::Stringy.3
Manifying blib/man3/IO::Scalar.3
Manifying blib/man3/IO::InnerFile.3
[MSG] [Fri Mar 14 00:10:37 2008] MAKE TEST passed: PERL_DL_NONLAZY=1
/Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/IO_Lines............ok
t/IO_Scalar...........ok
t/IO_ScalarArray......ok
t/IO_WrapTie..........ok
t/simple..............ok
t/two.................ok
All tests successful.
Files=6, Tests=116, 2 wallclock secs ( 0.17 usr 0.07 sys + 1.20 cusr
0.32 csys = 1.76 CPU)
Result: PASS
[MSG] [Fri Mar 14 00:10:37 2008] Sending test re****t for
'IO-stringy-2.110'
[MSG] [Fri Mar 14 00:10:37 2008] Ok, not sending test re****t
[MSG] [Fri Mar 14 00:10:39 2008] cp lib/File/Binary.pm
blib/lib/File/Binary.pm
Manifying blib/man3/File::Binary.3
[ERROR] [Fri Mar 14 00:11:04 2008] MAKE TEST failed: PERL_DL_NONLAZY=1
/Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00seek.......................Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 10/10 subtests
# Looks like your test died before it could output anything.
t/01power3.u8.ints.be..........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/01power3.u8.ints.le.......... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/02power3.n32.ints.be.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/02power3.n32.ints.le......... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/03power3.n16.ints.be.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/03power3.n16.ints.le......... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/04power3.n8.ints.be..........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/04power3.n8.ints.le..........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/05power3.p8.ints.be..........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/05power3.p8.ints.le.......... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/06power3.u32.ints.be.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/06power3.u32.ints.le.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/07power3.u16.ints.be.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/07power3.u16.ints.le.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/08power3.p32.ints.be.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/08power3.p32.ints.le.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/09power3.p16.ints.be.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
# Looks like your test died before it could output anything.
t/09power3.p16.ints.le.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/10power10.u8.ints.be......... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/10power10.u8.ints.le.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/11power10.n32.ints.be........ Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/11power10.n32.ints.le........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/12power10.n16.ints.be........ Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/12power10.n16.ints.le........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/13power10.n8.ints.be.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/13power10.n8.ints.le......... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/14power10.p8.ints.be.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/14power10.p8.ints.le.........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/15power10.u32.ints.be........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/15power10.u32.ints.le........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/16power10.u16.ints.be........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/16power10.u16.ints.le........ Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/17power10.p32.ints.be........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/17power10.p32.ints.le........ Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/18power10.p16.ints.be........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/18power10.p16.ints.le........Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
# Looks like your test died before it could output anything.
t/19factorial.u8.ints.be.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/19factorial.u8.ints.le.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/20factorial.n32.ints.be...... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/20factorial.n32.ints.le......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/21factorial.n16.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/21factorial.n16.ints.le......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/22factorial.n8.ints.be....... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/22factorial.n8.ints.le.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/23factorial.p8.ints.be.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/23factorial.p8.ints.le.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/24factorial.u32.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/24factorial.u32.ints.le......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/25factorial.u16.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/25factorial.u16.ints.le...... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/26factorial.p32.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/26factorial.p32.ints.le...... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/27factorial.p16.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/27factorial.p16.ints.le...... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/28fibonacci.u8.ints.be.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/28fibonacci.u8.ints.le.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/29fibonacci.n32.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/29fibonacci.n32.ints.le......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/30fibonacci.n16.ints.be...... Dubious, test returned 255 (wstat 65280,
0xff00)
No subtests run
Can't locate object method "binmode" via package "IO::File" (perhaps you
forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
t/30fibonacci.n16.ints.le......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/31fibonacci.n8.ints.be.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/31fibonacci.n8.ints.le.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/32fibonacci.p8.ints.be.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/32fibonacci.p8.ints.le.......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
# Looks like your test died before it could output anything.
t/33fibonacci.u32.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/33fibonacci.u32.ints.le......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/34fibonacci.u16.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/34fibonacci.u16.ints.le......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/35fibonacci.p32.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/35fibonacci.p32.ints.le......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/36fibonacci.p16.ints.be......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/36fibonacci.p16.ints.le......Can't locate object method "binmode" via
package "IO::File" (perhaps you forgot to load "IO::File"?) at
/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib/File/Binary.pm
line 132.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Test Summary Re****t
-------------------
t/00seek.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 10 tests but ran 0.
t/01power3.u8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/01power3.u8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/02power3.n32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/02power3.n32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/03power3.n16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/03power3.n16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/04power3.n8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/04power3.n8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/05power3.p8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/05power3.p8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/06power3.u32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/06power3.u32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/07power3.u16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/07power3.u16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/08power3.p32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/08power3.p32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/09power3.p16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/09power3.p16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/10power10.u8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/10power10.u8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/11power10.n32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/11power10.n32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/12power10.n16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/12power10.n16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/13power10.n8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/13power10.n8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/14power10.p8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/14power10.p8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/15power10.u32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/15power10.u32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/16power10.u16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/16power10.u16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/17power10.p32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/17power10.p32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/18power10.p16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/18power10.p16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/19factorial.u8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/19factorial.u8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/20factorial.n32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/20factorial.n32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/21factorial.n16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/21factorial.n16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/22factorial.n8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/22factorial.n8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/23factorial.p8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/23factorial.p8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/24factorial.u32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/24factorial.u32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/25factorial.u16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/25factorial.u16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/26factorial.p32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/26factorial.p32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/27factorial.p16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/27factorial.p16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/28fibonacci.u8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/28fibonacci.u8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/29fibonacci.n32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/29fibonacci.n32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/30fibonacci.n16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/30fibonacci.n16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/31fibonacci.n8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/31fibonacci.n8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/32fibonacci.p8.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/32fibonacci.p8.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/33fibonacci.u32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/33fibonacci.u32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/34fibonacci.u16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/34fibonacci.u16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/35fibonacci.p32.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/35fibonacci.p32.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/36fibonacci.p16.ints.be.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/36fibonacci.p16.ints.le.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=73, Tests=0, 24 wallclock secs ( 0.95 usr 1.25 sys + 14.90 cusr
4.96 csys = 22.06 CPU)
Result: FAIL
Failed 73/73 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 35
[MSG] [Fri Mar 14 00:11:04 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
IO::Scalar 2.110 0
Test::More 0.74 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 3.07e-02. Powered by
POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
PERL5LIB =
:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-stringy-2.110/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-stringy-2.110/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-stringy-2.110/blib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-stringy-2.110/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-stringy-2.110/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-stringy-2.110/blib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/File-Binary-1.5/blib
PERL5_CPANPLUS_IS_EXECUTING =
PERL5_CPANPLUS_IS_RUNNING = 29463
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl
UID: $< = 502
EUID: $> = 502
GID: $( = 502 502
EGID: $) = 502 502
-------------------------------
--
Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
Platform:
osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int
uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version
8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power
macintosh powerpc '
config_args='-e'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
Compiler:
cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp
-fno-strict-aliasing -I/usr/local/include',
optimize='-O3',
cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp
-fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)',
gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8,
Off_t='off_t', lseeksize=8
alignbytes=8, usemymalloc=n, prototype=define
Linker and Libraries:
ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags ='
-L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-ldbm -ldl -lm -lc
perllibs=-ldl -lm -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false,
libperl=libperl.a
Dynamic Linking:
dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup
-L/usr/local/lib'
|
