This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear KESTEB,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Mar 14 00:23:06 2008] Trying to get
'http://www.cpan.org/authors/id/K/KE/KESTEB/POE-Component-Client-Stomp-0.05.tar.gz'
[MSG] [Fri Mar 14 00:23:10 2008] Trying to get
'http://www.cpan.org/authors/id/K/KE/KESTEB/CHECKSUMS'
[MSG] [Fri Mar 14 00:23:12 2008] Checksum matches for
'POE-Component-Client-Stomp-0.05.tar.gz'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/t/'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/t/99_pod.t'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/t/01_load.t'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/t/02_basic.t'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/lib/'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/lib/POE/'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/lib/POE/Component/'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/lib/POE/Component/Client/'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/lib/POE/Component/Client/Stomp.pm'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/README'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/Changes'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/Makefile.PL'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/META.yml'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/examples/'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/examples/feed_queue.pl'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/examples/stress_queue.pl'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/examples/dump_queue.pl'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted
'POE-Component-Client-Stomp-0.05/MANIFEST'
[MSG] [Fri Mar 14 00:23:12 2008] Extracted 'POE::Component::Client::Stomp'
to
'/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05'
[MSG] [Fri Mar 14 00:23:12 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Net::Stomp 0 not found.
Warning: prerequisite POE::Component::Client::Stomp::Utils 0 not found.
Warning: prerequisite POE::Filter::Stomp 0 not found.
Writing Makefile for POE::Component::Client::Stomp
[MSG] [Fri Mar 14 00:23:12 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Fri Mar 14 00:23:12 2008] Module 'POE::Component::Client::Stomp'
requires 'Net::Stomp' version '0' to be installed
[MSG] [Fri Mar 14 00:23:12 2008] Module 'POE::Component::Client::Stomp'
requires 'POE::Component::Client::Stomp::Utils' version '0' to be
installed
[MSG] [Fri Mar 14 00:23:12 2008] Module 'POE::Component::Client::Stomp'
requires 'POE::Filter::Stomp' version '0' to be installed
[MSG] [Fri Mar 14 00:23:12 2008] Trying to get
'http://www.cpan.org/authors/id/L/LB/LBROCARD/Net-Stomp-0.32.tar.gz'
[MSG] [Fri Mar 14 00:23:14 2008] Trying to get
'http://www.cpan.org/authors/id/L/LB/LBROCARD/CHECKSUMS'
[MSG] [Fri Mar 14 00:23:20 2008] Checksum matches for
'Net-Stomp-0.32.tar.gz'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/t/'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted
'Net-Stomp-0.32/t/pod_coverage.t'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/t/pod.t'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/CHANGES'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/META.yml'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/lib/'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/lib/Net/'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted
'Net-Stomp-0.32/lib/Net/Stomp.pm'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/lib/Net/Stomp/'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted
'Net-Stomp-0.32/lib/Net/Stomp/Frame.pm'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/MANIFEST'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/Build.PL'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/Makefile.PL'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net-Stomp-0.32/README'
[MSG] [Fri Mar 14 00:23:20 2008] Extracted 'Net::Stomp' to
'/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32'
[ERROR] [Fri Mar 14 00:23:20 2008] This module requires 'Module::Build'
and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will
fall back to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Fri Mar 14 00:23:20 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Class::Accessor::Fast 0 not found.
Writing Makefile for Net::Stomp
[MSG] [Fri Mar 14 00:23:20 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Fri Mar 14 00:23:20 2008] Module 'Net::Stomp' requires
'Class::Accessor::Fast' version '0' to be installed
[MSG] [Fri Mar 14 00:23:20 2008] Trying to get
'http://www.cpan.org/authors/id/K/KA/KASEI/Class-Accessor-0.31.tar.gz'
[MSG] [Fri Mar 14 00:23:22 2008] Trying to get
'http://www.cpan.org/authors/id/K/KA/KASEI/CHECKSUMS'
[MSG] [Fri Mar 14 00:23:23 2008] Checksum matches for
'Class-Accessor-0.31.tar.gz'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/t/'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/t/croak.t'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/t/bestpractice.t'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/t/getset.t'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/t/aliases.t'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/t/accessors.t'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/lib/'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/lib/Class/'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/lib/Class/Accessor/'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/lib/Class/Accessor/Faster.pm'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/lib/Class/Accessor/Fast.pm'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/lib/Class/Accessor.pm'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/README'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/Changes'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/Makefile.PL'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/META.yml'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/INSTALL'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/examples/'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted
'Class-Accessor-0.31/examples/benchmark'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class-Accessor-0.31/MANIFEST'
[MSG] [Fri Mar 14 00:23:23 2008] Extracted 'Class::Accessor::Fast' to
'/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31'
[MSG] [Fri Mar 14 00:23:23 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Class::Accessor
[MSG] [Fri Mar 14 00:23:23 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Fri Mar 14 00:23:24 2008] cp lib/Class/Accessor/Fast.pm
blib/lib/Class/Accessor/Fast.pm
cp lib/Class/Accessor/Faster.pm blib/lib/Class/Accessor/Faster.pm
cp lib/Class/Accessor.pm blib/lib/Class/Accessor.pm
Manifying blib/man3/Class::Accessor::Faster.3
Manifying blib/man3/Class::Accessor::Fast.3
Manifying blib/man3/Class::Accessor.3
[MSG] [Fri Mar 14 00:23:24 2008] MAKE TEST passed: t/accessors.........ok
t/aliases...........ok
t/bestpractice......ok
t/croak.............ok
t/getset............ok
All tests successful.
Files=5, Tests=119, 0 wallclock secs ( 0.05 usr 0.00 sys + 0.19 cusr
0.04 csys = 0.28 CPU)
Result: PASS
[MSG] [Fri Mar 14 00:23:24 2008] Sending test re****t for
'Class-Accessor-0.31'
[MSG] [Fri Mar 14 00:23:24 2008] Ok, not sending test re****t
[MSG] [Fri Mar 14 00:23:25 2008] cp lib/Net/Stomp/Frame.pm
blib/lib/Net/Stomp/Frame.pm
cp lib/Net/Stomp.pm blib/lib/Net/Stomp.pm
Manifying blib/man3/Net::Stomp::Frame.3
Manifying blib/man3/Net::Stomp.3
[MSG] [Fri Mar 14 00:23:25 2008] MAKE TEST passed: t/pod...............ok
t/pod_coverage......skipped: Test::Pod::Coverage 1.04 required for testing
POD coverage
All tests successful.
Files=2, Tests=2, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.11 cusr
0.01 csys = 0.14 CPU)
Result: PASS
[MSG] [Fri Mar 14 00:23:25 2008] Sending test re****t for 'Net-Stomp-0.32'
[MSG] [Fri Mar 14 00:23:25 2008] Ok, not sending test re****t
[MSG] [Fri Mar 14 00:23:25 2008] Trying to get
'http://www.cpan.org/authors/id/K/KE/KESTEB/POE-Component-Client-Stomp-Utils-0.01.tar.gz'
[MSG] [Fri Mar 14 00:23:27 2008] Trying to get
'http://www.cpan.org/authors/id/K/KE/KESTEB/CHECKSUMS'
[MSG] [Fri Mar 14 00:23:28 2008] Checksum matches for
'POE-Component-Client-Stomp-Utils-0.01.tar.gz'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/t/'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/t/POE-Component-Client-Stomp-Utils.t'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/lib/'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/lib/POE/'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/lib/POE/Component/'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/lib/POE/Component/Client/'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/lib/POE/Component/Client/Stomp/'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/lib/POE/Component/Client/Stomp/Utils.pm'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/README'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/Changes'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/Makefile.PL'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/META.yml'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE-Component-Client-Stomp-Utils-0.01/MANIFEST'
[MSG] [Fri Mar 14 00:23:28 2008] Extracted
'POE::Component::Client::Stomp::Utils' to
'/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01'
[MSG] [Fri Mar 14 00:23:28 2008] Checking if your kit is complete...
Looks good
Writing Makefile for POE::Component::Client::Stomp::Utils
[MSG] [Fri Mar 14 00:23:28 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Fri Mar 14 00:23:28 2008] cp
lib/POE/Component/Client/Stomp/Utils.pm
blib/lib/POE/Component/Client/Stomp/Utils.pm
Manifying blib/man3/POE::Component::Client::Stomp::Utils.3
[MSG] [Fri Mar 14 00:23:29 2008] MAKE TEST passed:
t/POE-Component-Client-Stomp-Utils......ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.03 cusr
0.01 csys = 0.06 CPU)
Result: PASS
[MSG] [Fri Mar 14 00:23:29 2008] Sending test re****t for
'POE-Component-Client-Stomp-Utils-0.01'
[MSG] [Fri Mar 14 00:23:29 2008] Ok, not sending test re****t
[MSG] [Fri Mar 14 00:23:29 2008] Trying to get
'http://www.cpan.org/authors/id/K/KE/KESTEB/POE-Filter-Stomp-0.03.tar.gz'
[MSG] [Fri Mar 14 00:23:32 2008] Trying to get
'http://www.cpan.org/authors/id/K/KE/KESTEB/CHECKSUMS'
[MSG] [Fri Mar 14 00:23:38 2008] Checksum matches for
'POE-Filter-Stomp-0.03.tar.gz'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted 'POE-Filter-Stomp-0.03/'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted 'POE-Filter-Stomp-0.03/t/'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/99_pod.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/05_put.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/09_noheader.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/04_content.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/06_put_content.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/08_nobody.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/01_load.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/07_pending.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/03_huge.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/t/02_basic.t'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted 'POE-Filter-Stomp-0.03/lib/'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/lib/POE/'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/lib/POE/Filter/'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/lib/POE/Filter/Stomp.pm'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted 'POE-Filter-Stomp-0.03/README'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted 'POE-Filter-Stomp-0.03/Changes'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/Makefile.PL'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/META.yml'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted
'POE-Filter-Stomp-0.03/MANIFEST'
[MSG] [Fri Mar 14 00:23:38 2008] Extracted 'POE::Filter::Stomp' to
'/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03'
[MSG] [Fri Mar 14 00:23:38 2008] Checking if your kit is complete...
Looks good
Writing Makefile for POE::Filter::Stomp
[MSG] [Fri Mar 14 00:23:38 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Fri Mar 14 00:23:39 2008] cp lib/POE/Filter/Stomp.pm
blib/lib/POE/Filter/Stomp.pm
Manifying blib/man3/POE::Filter::Stomp.3
[MSG] [Fri Mar 14 00:23:39 2008] MAKE TEST passed:
t/01_load.............ok
t/02_basic............ok
t/03_huge.............ok
t/04_content..........ok
t/05_put..............ok
t/06_put_content......ok
t/07_pending..........ok
t/08_nobody...........ok
t/09_noheader.........ok
t/99_pod..............skipped: Enable TEST_POD environment variable to
test POD
All tests successful.
Files=10, Tests=119, 0 wallclock secs ( 0.09 usr 0.01 sys + 0.52 cusr
0.06 csys = 0.68 CPU)
Result: PASS
[MSG] [Fri Mar 14 00:23:39 2008] Sending test re****t for
'POE-Filter-Stomp-0.03'
[MSG] [Fri Mar 14 00:23:39 2008] Ok, not sending test re****t
[MSG] [Fri Mar 14 00:23:40 2008] cp lib/POE/Component/Client/Stomp.pm
blib/lib/POE/Component/Client/Stomp.pm
Manifying blib/man3/POE::Component::Client::Stomp.3
[ERROR] [Fri Mar 14 00:23:40 2008] MAKE TEST failed:
不希望的裝置輸出入控制 (ioctl) t/01_load.......
# Failed test 'use POE::Component::Client::Stomp;'
# at t/01_load.t line 8.
# Tried to use 'POE::Component::Client::Stomp'.
# Error: Can't locate POE.pm in @[EMAIL PROTECTED]
(@[EMAIL PROTECTED]
contains:
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib/arch
/home/imacat/lib/perl5
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib/arch
/opt/perl/testers/.!
cpanplus/5.8.8/build/Net-Stomp-0.32/blib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib
/opt/perl/t!
esters/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/b!
lib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib
/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld
/opt/perl/testers/lib/5.8.8
/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld
/opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .)
at
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib/lib/POE/Component/Client/Stomp.pm
line 3.
# BEGIN failed--compilation aborted at
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib/lib/POE/Component/Client/Stomp.pm
line 3.
# Compilation failed in require at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/02_basic......Can't locate POE.pm in @[EMAIL PROTECTED]
(@[EMAIL PROTECTED]
contains:
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib/arch
/home/imacat/lib/perl5
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib/arch
/opt/perl/testers!
/.cpanplus/5.8.8/build/Net-Stomp-0.32/blib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-Utils-0.01/blib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib/lib
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Filter-Stomp-0.03/blib
/opt/perl!
/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05!
/blib/li
b
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib/arch
/opt/perl/testers/.cpanplus/5.8.8/build/POE-Component-Client-Stomp-0.05/blib
/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld
/opt/perl/testers/lib/5.8.8
/opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld
/opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .)
at t/02_basic.t line 12.
BEGIN failed--compilation aborted at t/02_basic.t line 12.
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/99_pod........skipped: Enable TEST_POD environment variable to test POD
Test Summary Re****t
-------------------
t/01_load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/02_basic.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=3, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr
0.03 csys = 0.11 CPU)
Result: FAIL
Failed 2/3 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Fri Mar 14 00:23:40 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
POE
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'KESTEB (cpanplus-info@[EMAIL PROTECTED]
)',
... # other information
PREREQ_PM => {
'POE' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/>
may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Net::Stomp 0.32 0
POE::Component::Client::Stomp::Utils 0.01 0
POE::Filter::Stomp 0.03 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
|
