This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Laye Suen,
This is a computer-generated re****t for Algorithm-LBFGS-0.16
on perl 5.10.0, created by CPAN-Re****ter-1.11.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this re****t is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL re****ts for missing library
or binary dependencies, unsup****ted operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this re****t is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/01-parameter.t
t/02-optimization.t t/03-progress.t t/98-pod.t
t/01-parameter.........ok
t/02-optimization......ok
t/03-progress..........
# Failed test 'Check the consistency of x and xnorm'
# at t/03-progress.t line 45.
# Structures begin differing at:
# $got->[0] = '6.09364382733100593'
# $expected->[0] = '6.09364382733100651'
# Failed test 'Check the consistency of g (grad f(x)) and gnorm'
# at t/03-progress.t line 54.
# Structures begin differing at:
# $got->[0] = '5.11413079529132108'
# $expected->[0] = '5.11413079529132109'
# Looks like you failed 2 tests of 5.
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/5 subtests
t/98-pod...............skipped: Test::Pod 1.00 required for testing POD
Test Summary Re****t
-------------------
t/03-progress.t (Wstat: 512 Tests: 5 Failed: 2)
Failed tests: 3-4
Non-zero exit status: 2
Files=4, Tests=15, 2 wallclock secs ( 0.04 usr 0.00 sys + 1.96 cusr
0.05 csys = 2.05 CPU)
Result: FAIL
Failed 1/4 test programs. 2/15 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = zh_TW
LANGUAGE = zh_TW
LC_ALL = zh_TW
LC_COLLATE = zh_TW
LC_CTYPE = zh_TW
LC_MESSAGES = zh_TW
LC_MONETARY = zh_TW
LC_NUMERIC = zh_TW
LC_TIME = zh_TW
PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
PERL5LIB =
/home/imacat/.cpan/build/YAML-Syck-1.04-In2MjD/blib/arch:/home/imacat/.cpan/build/YAML-Syck-1.04-In2MjD/blib/lib:/home/imacat/.cpan/build/Devel-Leak-0.03-mArY5Y/blib/arch:/home/imacat/.cpan/build/Devel-Leak-0.03-mArY5Y/blib/lib:/home/imacat/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 31909
PERL5_CPAN_IS_RUNNING = 31909
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/zsh
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /opt/perl/5.10.0/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
$EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.9205
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.13
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::Par***S 2.19
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature 0.55
Test::Harness 3.10
Test::More 0.78
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid
-Dinc_version_list=none -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing
-pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'
|
