This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear DROLSKY,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Mar 4 02:17:40 2008] Trying to get
'http://www.cpan.org/authors/id/D/DR/DROLSKY/CHECKSUMS'
[MSG] [Tue Mar 4 02:17:45 2008] Checksum matches for
'Catalyst-Plugin-RedirectAndDetach-0.01.tar.gz'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/t/'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/t/pod.t'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/t/pod-coverage.t'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/t/01-load.t'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/t/kwalitee.t'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/META.yml'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/Changes'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/README'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/MANIFEST'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/Makefile.PL'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/lib/'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/lib/Catalyst/'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/lib/Catalyst/Plugin/'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/lib/Catalyst/Plugin/RedirectAndDetach.pm'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/SIGNATURE'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst-Plugin-RedirectAndDetach-0.01/Build.PL'
[MSG] [Tue Mar 4 02:17:45 2008] Extracted
'Catalyst::Plugin::RedirectAndDetach' to
'/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Catalyst-Plugin-RedirectAndDetach-0.01'
[MSG] [Tue Mar 4 02:17:48 2008] # running Build.PL
/home/cpan/perl5.10.0/bin/perl Build.PL
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Creating new 'Build' script for 'Catalyst-Plugin-RedirectAndDetach'
version '0.01'
[MSG] [Tue Mar 4 02:17:48 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Tue Mar 4 02:17:50 2008] /home/cpan/perl5.10.0/bin/perl Build
--makefile_env_macros 1
Copying lib/Catalyst/Plugin/RedirectAndDetach.pm ->
blib/lib/Catalyst/Plugin/RedirectAndDetach.pm
Manifying blib/lib/Catalyst/Plugin/RedirectAndDetach.pm ->
blib/libdoc/Catalyst::Plugin::RedirectAndDetach.3
[ERROR] [Tue Mar 4 02:17:54 2008] MAKE TEST failed: Illegal seek
/home/cpan/perl5.10.0/bin/perl Build --makefile_env_macros 1 test
t/01-load...........
# Failed test 'use Catalyst::Plugin::RedirectAndDetach;'
# at t/01-load.t line 6.
# Tried to use 'Catalyst::Plugin::RedirectAndDetach'.
# Error: Can't locate Params/Validate.pm in @[EMAIL PROTECTED]
(@[EMAIL PROTECTED]
contains:
/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Catalyst-Plugin-RedirectAndDetach-0.01/blib/lib
/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Catalyst-Plugin-RedirectAndDetach-0.01/blib/arch
/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Catalyst-Plugin-RedirectAndDetach-0.01/blib
/home/cpan/perl5.10.0/lib/5.10.0/OpenBSD.i386-openbsd-thread-multi-64int
/home/cpan/perl5.10.0/lib/5.10.0
/home/cpan/perl5.10.0/lib/site_perl/5.10.0/OpenBSD.i386-openbsd-thread-multi-64int
/home/cpan/perl5.10.0/lib/site_perl/5.10.0 .) at
/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Catalyst-Plugin-RedirectAndDetach-0.01/blib/lib/Catalyst/Plugin/RedirectAndDetach.pm
line 8.
# BEGIN failed--compilation aborted at t/01-load.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/kwalitee..........skipped: This test is only run for the module author
t/pod-coverage......skipped: This test is only run for the module author
t/pod...............skipped: This test is only run for the module author
Test Summary Re****t
-------------------
t/01-load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=4, Tests=1, 2 wallclock secs ( 0.01 usr 0.37 sys + 0.08 cusr
0.83 csys = 1.29 CPU)
Result: FAIL
Failed 1/4 test programs. 1/1 subtests failed.
*** Error code 255
Stop in
/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Catalyst-Plugin-RedirectAndDetach-0.01
(line 64 of Makefile).
[MSG] [Tue Mar 4 02:17:54 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Params::Validate
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'DROLSKY (cpanplus-info@[EMAIL PROTECTED]
)',
... # other information
PREREQ_PM => {
'Params::Validate' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/>
may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.72 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.0307. Powered by
POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH =
/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB =
:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Catalyst-Plugin-RedirectAndDetach-0.01/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Catalyst-Plugin-RedirectAndDetach-0.01/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Catalyst-Plugin-RedirectAndDetach-0.01/blib
PERL5_CPANPLUS_IS_RUNNING = 28531
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/ksh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl5.10.0/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 1000 1000 0
EGID: $) = 1000 1000 0
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=openbsd, osvers=4.2,
archname=OpenBSD.i386-openbsd-thread-multi-64int
uname='openbsd wynionyn.bingosnet.co.uk 4.2 generic#375 i386 '
config_args='-de -Dprefix=/home/cpan/perl5.10.0 -Dusethreads
-Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe
-I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.5 (propolice)',
gccosandvers='openbsd4.2'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8,
Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
|
