This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear SHLOMIF,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Feb 23 00:36:00 2008] Trying to get
'http://www.cpan.org/authors/id/S/SH/SHLOMIF/IO-Socket-INET6-2.53.tar.gz'
[MSG] [Sat Feb 23 00:36:01 2008] Trying to get
'http://www.cpan.org/authors/id/S/SH/SHLOMIF/CHECKSUMS'
[MSG] [Sat Feb 23 00:36:03 2008] Checksum matches for
'IO-Socket-INET6-2.53.tar.gz'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO-Socket-INET6-2.53/'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO-Socket-INET6-2.53/t/'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted
'IO-Socket-INET6-2.53/t/io_udp6.t'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted
'IO-Socket-INET6-2.53/t/io_multihomed6.t'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted
'IO-Socket-INET6-2.53/t/host6.t'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted
'IO-Socket-INET6-2.53/t/io_sock6.t'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted
'IO-Socket-INET6-2.53/t/pod-coverage.t'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO-Socket-INET6-2.53/t/pod.t'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO-Socket-INET6-2.53/META.yml'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO-Socket-INET6-2.53/MANIFEST'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted
'IO-Socket-INET6-2.53/ChangeLog'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO-Socket-INET6-2.53/lib/'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO-Socket-INET6-2.53/lib/IO/'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted
'IO-Socket-INET6-2.53/lib/IO/Socket/'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted
'IO-Socket-INET6-2.53/lib/IO/Socket/INET6.pm'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO-Socket-INET6-2.53/Build.PL'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted
'IO-Socket-INET6-2.53/Makefile.PL'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO-Socket-INET6-2.53/README'
[MSG] [Sat Feb 23 00:36:04 2008] Extracted 'IO::Socket::INET6' to
'/opt/perl/testers/.cpanplus/5.8.8/build/IO-Socket-INET6-2.53'
[MSG] [Sat Feb 23 00:36:04 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Socket6 0.12 not found.
Writing Makefile for IO::Socket::INET6
[MSG] [Sat Feb 23 00:36:04 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Sat Feb 23 00:36:04 2008] Module 'IO::Socket::INET6' requires
'Socket6' version '0.12' to be installed
[MSG] [Sat Feb 23 00:36:04 2008] Trying to get
'http://www.cpan.org/authors/id/U/UM/UMEMOTO/Socket6-0.20.tar.gz'
[MSG] [Sat Feb 23 00:36:06 2008] Trying to get
'http://www.cpan.org/authors/id/U/UM/UMEMOTO/CHECKSUMS'
[MSG] [Sat Feb 23 00:36:07 2008] Checksum matches for
'Socket6-0.20.tar.gz'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/t/'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/gai.h'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/getnameinfo.c'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/MANIFEST'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/config.h.in'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/configure.in'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/Socket6.xs'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/im-140.diff'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/inet_pton.c'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/aclocal.m4'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/ChangeLog'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/inet_ntop.c'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/configure'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/gailookup.pl.in'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted
'Socket6-0.20/ftpmirror-1.96.diff'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/config.pl.in'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/Socket6.pm'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/README'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/Makefile.PL'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/getaddrinfo.c'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/META.yml'
[MSG] [Sat Feb 23 00:36:07 2008] Extracted 'Socket6-0.20/t/use.t'
[MSG] [Sat Feb 23 00:36:08 2008] Extracted 'Socket6' to
'/opt/perl/testers/.cpanplus/5.8.8/build/Socket6-0.20'
[MSG] [Sat Feb 23 00:36:13 2008] checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking whether your Perl5 have PL_sv_undef... yes
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for getaddrinfo... yes
checking for getnameinfo... yes
checking for gethostbyname2... yes
checking for getipnodebyname... no
checking for getipnodebyname in -lsocket... no
checking whether your system has IPv6 directory... no
checking for getipnodebyaddr... no
checking for getipnodebyaddr in -lsocket... no
checking whether your system has IPv6 directory... (cached) no
checking for inet_pton... yes
checking for inet_ntop... yes
checking whether you have sa_len in struct sockaddr... no
checking whether you have sin6_scope_id in struct sockaddr_in6... yes
checking for socklen_t... yes
configure: creating ./config.status
config.status: creating config.pl
config.status: creating gailookup.pl
config.status: creating config.h
Checking if your kit is complete...
Looks good
Writing Makefile for Socket6
[MSG] [Sat Feb 23 00:36:13 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Sat Feb 23 00:36:15 2008] Running Mkbootstrap for Socket6 ()
cp Socket6.pm blib/lib/Socket6.pm
Socket6.xs: In function 'XS_Socket6_getipnodebyname':
Socket6.xs:866: warning: cast to pointer from integer of different size
Socket6.xs: In function 'XS_Socket6_getipnodebyaddr':
Socket6.xs:937: warning: cast to pointer from integer of different size
[MSG] [Sat Feb 23 00:36:16 2008] MAKE TEST passed: t/use......ok
All tests successful.
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.03 cusr
0.12 csys = 0.19 CPU)
Result: PASS
[MSG] [Sat Feb 23 00:36:16 2008] Sending test re****t for 'Socket6-0.20'
[MSG] [Sat Feb 23 00:36:16 2008] Ok, not sending test re****t
[MSG] [Sat Feb 23 00:36:17 2008] cp lib/IO/Socket/INET6.pm
blib/lib/IO/Socket/INET6.pm
Manifying blib/man3/IO::Socket::INET6.3
[ERROR] [Sat Feb 23 00:36:41 2008] MAKE TEST failed:
不希望的裝置輸出入控制 (ioctl) t/host6...............Can't call method
"peerhost" on an undefined value at t/host6.t line 63.
Use of uninitialized value in <HANDLE> at t/host6.t line 50.
readline() on unopened filehandle at t/host6.t line 50.
Failed 3/4 subtests
t/io_multihomed6......ok
t/io_sock6............Can't call method "sock****t" on an undefined value
at t/io_sock6.t line 190, <GEN4> line 2.
Dubious, test returned 97 (wstat 24832, 0x6100)
Failed 10/20 subtests
t/io_udp6.............ok
t/pod-coverage........ok
t/pod.................ok
Test Summary Re****t
-------------------
t/host6.t (Wstat: 0 Tests: 1 Failed: 0)
Parse errors: Bad plan. You planned 4 tests but ran 1.
t/io_sock6.t (Wstat: 24832 Tests: 11 Failed: 1)
Failed test: 10
Non-zero exit status: 97
Parse errors: Bad plan. You planned 20 tests but ran 11.
Files=6, Tests=26, 23 wallclock secs ( 0.08 usr 0.01 sys + 0.67 cusr
1.05 csys = 1.81 CPU)
Result: FAIL
Failed 2/6 test programs. 1/26 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Sat Feb 23 00:36:41 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
IO::Socket 1.30 0
Socket6 0.20 0.12
Test::More 0.74 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
|
