This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Wilson Snyder,
This is a computer-generated re****t for Verilog-Perl-3.022
on perl 5.10.0, created by CPAN-Re****ter-1.09.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[this re****t is from an automated smoke testing program
and was not reviewed by a human for accuracy]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from 'make test':
make[1]: Entering directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Parser'
make[1]: Leaving directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Parser'
make[1]: Entering directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc'
cd src && make example
make[2]: Entering directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
make[2]: `example' is up to date.
make[2]: Leaving directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
make[2]: Entering directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
rm -f ../blib/arch/auto/Verilog/Preproc/Preproc.so
LD_RUN_PATH="/usr/lib" g++ -shared -O2 -L/usr/local/lib Preproc.o -o
../blib/arch/auto/Verilog/Preproc/Preproc.so src/VFileLine.o
src/VPreproc.o src/VPreprocLex.o \
-lstdc++ \
chmod 755 ../blib/arch/auto/Verilog/Preproc/Preproc.so
make[1]: Leaving directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc'
PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_pod...............ok
t/01_manifest..........ok
t/02_help..............ok
t/10_keywords..........ok
t/12_splitbus..........ok
t/14_numbers...........ok
t/20_getopt............ok
t/30_preproc...........ok
t/32_noinc.............ok
t/34_parser............ok
t/35_sigparser.........ok
t/36_sigmany...........ok
t/40_netlist...........ok
t/42_dumpcheck.........ok
t/44_create............ok
t/46_link..............ok
t/50_vrename...........ok
t/56_editfiles.........ok
t/58_vsplitmodule......ok
t/60_vpm...............
*** You do not seem to have VCS or NC-Verilog installed, not running rest
of test.
*** (If you do not own VCS/NC-Verilog, ignore this warning).
ok
t/80_vppp..............ok
t/85_vhier.............ok
All tests successful.
Files=22, Tests=167, 4 wallclock secs ( 0.15 usr 0.06 sys + 3.71 cusr
0.52 csys = 4.44 CPU)
Result: PASS
make[1]: Entering directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Parser'
No tests defined for Verilog::Parser extension.
make[1]: Leaving directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Parser'
make[1]: Entering directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc'
cd src && make example
make[2]: Entering directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
make[2]: `example' is up to date.
make[2]: Leaving directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
make[2]: Entering directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
rm -f ../blib/arch/auto/Verilog/Preproc/Preproc.so
LD_RUN_PATH="/usr/lib" g++ -shared -O2 -L/usr/local/lib Preproc.o -o
../blib/arch/auto/Verilog/Preproc/Preproc.so src/VFileLine.o
src/VPreproc.o src/VPreprocLex.o \
-lstdc++ \
chmod 755 ../blib/arch/auto/Verilog/Preproc/Preproc.so
make[2]: Entering directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
No tests defined for Verilog::Preproc::lib extension.
make[2]: Leaving directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc/src'
make[1]: Leaving directory
`/home/d/.cpan/build/Verilog-Perl-3.022-Y7s7rf/Preproc'
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
---------- ---- ----
Pod::Usage 0 1.35
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_IE.UTF-8
LC_ADDRESS = en_IE.utf8
LC_COLLATE = POSIX
LC_CTYPE = en_IE.utf8
LC_IDENTIFICATION = en_IE.utf8
LC_MEASUREMENT = en_IE.utf8
LC_MESSAGES = en_IE.utf8
LC_MONETARY = nl_NL.utf8
LC_NAME = en_IE.utf8
LC_NUMERIC = en_IE.utf8
LC_PAPER = en_IE.utf8
LC_TELEPHONE = en_IE.utf8
LC_TIME = nl_NL.utf8
PATH =
/home/d/bin:/home/devogon/lib/blead/bin:/home/devogon/lib/blead/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/devogon/bin:/usr/games/bin:/usr/bin/mh:/usr/local/everything/bin:/usr/lib/surfraw:/home/devogon/bin:/usr/games/bin:/usr/bin/mh:/usr/local/everything/bin:/usr/lib/surfraw
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 17325
PERL5_CPAN_IS_RUNNING = 17325
PERL_MM_USE_DEFAULT = 1
PERL_TEST_POD = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/local/bin/perl
$UID/$EUID = 1004 / 1004
$GID = 1004 1004
$EGID = 1004 1004
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.9205
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.42
ExtUtils::Manifest 1.51_01
ExtUtils::Par***S 2.19
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature 0.55
Test::Harness 3.09
Test::More 0.74
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.23.1-slh64-smp-32, archname=x86_64-linux
uname='linux sanremo.defietser 2.6.23.1-slh64-smp-32 #1 smp preempt
thu nov 15 17:55:06 cet 2007 x86_64 gnulinux '
config_args='-des'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.3 20071014 (prerelease) (Debian
4.2.2-3)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
|
