This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Artur Bergman,
This is a computer-generated re****t for optimizer-0.05
on 5.11.0, created automatically by CPAN-Re****ter-1.08
and sent to the CPAN Testers mailing list.
If you have received this email directly, it is because the person testing
your distribution chose to send a copy to your CPAN email address; there
may be a delay before the official re****t is received and processed
by CPAN Testers.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems with your distribution. If these results are
not what you expect or if you would like to learn how to avoid FAIL
re****ts for missing dependencies, unsup****ted operating systems, etc.,
please consult "Notes for CPAN Authors" on the CPAN Testers Wiki:
http://cpantest.grango.org
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[none provided]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make':
make[3]: Entering directory `/home/sand/.cpan/build/optimizer-0.05-TmJwkH'
cp optimizer.pm blib/lib/optimizer.pm
/home/src/perl/repoperls/installed-perls/perl/pjxMWzm/perl-5.10.0@[EMAIL PROTECTED]
-typemap
/home/src/perl/repoperls/installed-perls/perl/pjxMWzm/perl-5.10.0@[EMAIL PROTECTED]
typemap optimizer.xs > optimizer.xsc && mv optimizer.xsc
optimizer.c
Please specify prototyping behavior for optimizer.xs (see perlxs manual)
cc -c -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.05\"
-DXS_VERSION=\"0.05\" -fPIC
"-I/home/src/perl/repoperls/installed-perls/perl/pjxMWzm/perl-5.10.0@[EMAIL PROTECTED]
"
optimizer.c
optimizer.xs: In function ‘c_extend_peep’:
optimizer.xs:176: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:182: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:184: error: ‘PL_op_seqmax’ undeclared (first use in this
function)
optimizer.xs:184: error: (Each undeclared identifier is re****ted only once
optimizer.xs:184: error: for each function it appears in.)
optimizer.xs:188: error: ‘OP_SETSTATE’ undeclared (first use in this
function)
optimizer.xs:192: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:222: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:240: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:244: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:272: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:294: error: ‘COP’ has no member named ‘cop_arybase’
optimizer.xs:334: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:345: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:353: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:368: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:369: error: ‘PMOP’ has no member named
‘op_pmreplstart’
optimizer.xs:370: error: ‘PMOP’ has no member named
‘op_pmreplstart’
optimizer.xs:371: error: ‘PMOP’ has no member named
‘op_pmreplstart’
optimizer.xs:371: error: ‘PMOP’ has no member named
‘op_pmreplstart’
optimizer.xs:372: error: ‘PMOP’ has no member named
‘op_pmreplstart’
optimizer.xs:376: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:404: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:450: error: ‘SVs_PADBUSY’ undeclared (first use in this
function)
optimizer.xs:466: error: ‘OP’ has no member named ‘op_seq’
optimizer.xs:521: error: ‘OP’ has no member named ‘op_seq’
optimizer.c: In function ‘XS_optimizer_op_seqmax’:
optimizer.c:607: error: ‘PL_op_seqmax’ undeclared (first use in this
function)
optimizer.c: In function ‘XS_optimizer_op_seqmax_inc’:
optimizer.c:629: error: ‘PL_op_seqmax’ undeclared (first use in this
function)
optimizer.xs: In function ‘XS_optimizer_relocatetopad’:
optimizer.xs:611: warning: cast to pointer from integer of different size
make[3]: *** [optimizer.o] Error 1
make[3]: Leaving directory `/home/sand/.cpan/build/optimizer-0.05-TmJwkH'
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = en_US.utf8
PATH =
/usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 9620
PERL5_CPAN_IS_EXECUTING =
/home/sand/.cpan/build/optimizer-0.05-TmJwkH/Makefile.PL
PERL5_CPAN_IS_RUNNING = 9620
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X =
/home/src/perl/repoperls/installed-perls/perl/pjxMWzm/perl-5.10.0@[EMAIL PROTECTED]
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.9205
Cwd 3.27
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.43_01
ExtUtils::Manifest 1.51_01
ExtUtils::Par***S 2.18_02
File::Spec 3.27
Module::Build 0.2808_01
Module::Signature 0.55
Test::Harness 3.08
Test::More 0.74
YAML 0.66
YAML::Syck 1.01
version 0.74
--
Summary of my perl5 (revision 5 version 11 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-64int
uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686
gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/pjxMWzm/perl-5.10.0@[EMAIL PROTECTED]
-Uversiononly -Dusedevel -des -Ui_db -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8,
Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
|
