This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear GFUJI,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Feb 8 01:47:08 2008] Trying to get
'http://www.cpan.org/authors/id/G/GF/GFUJI/HTML-FillInForm-Lite-0.01.tar.gz'
[MSG] [Fri Feb 8 01:47:09 2008] Trying to get
'http://www.cpan.org/authors/id/G/GF/GFUJI/CHECKSUMS'
[MSG] [Fri Feb 8 01:47:10 2008] Checksum matches for
'HTML-FillInForm-Lite-0.01.tar.gz'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted 'HTML-FillInForm-Lite-0.01/'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/Changes'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/lib/'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/lib/HTML/'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/lib/HTML/FillInForm/'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/lib/HTML/FillInForm/Lite.pm'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/Makefile.PL'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/MANIFEST'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/META.yml'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/misc/'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/misc/benchmark.pl'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/misc/form1.html'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/misc/form2.html'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/README'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted 'HTML-FillInForm-Lite-0.01/t/'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/t/00load.t'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/t/01input.t'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/t/02select.t'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/t/03textarea.t'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/t/04target.t'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted
'HTML-FillInForm-Lite-0.01/t/05encoding.t'
[MSG] [Fri Feb 8 01:47:10 2008] Extracted 'HTML::FillInForm::Lite' to
'/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/HTML-FillInForm-Lite-0.01'
[MSG] [Fri Feb 8 01:47:11 2008] Checking if your kit is complete...
Looks good
Writing Makefile for HTML::FillInForm::Lite
[MSG] [Fri Feb 8 01:47:11 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Fri Feb 8 01:47:14 2008] cp lib/HTML/FillInForm/Lite.pm
blib/lib/HTML/FillInForm/Lite.pm
Manifying blib/man3/HTML::FillInForm::Lite.3
[ERROR] [Fri Feb 8 01:47:16 2008] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /usr/home/cpan/perl5.10.0/bin/perl
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')"
t/*.t
t/00load..........ok
t/01input.........Cannot open
'/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/HTML-FillInForm-Lite-0.01/t/test.html':
No such file or directory at t/01input.t line 54
# Looks like you planned 71 tests but only ran 3.
# Looks like your test died just after 3.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 68/71 subtests
t/02select........ok
t/03textarea......ok
t/04target........ok
t/05encoding......ok
Test Summary Re****t
-------------------
t/01input.t (Wstat: 65280 Tests: 3 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 71 tests but ran 3.
Files=6, Tests=34, 2 wallclock secs ( 0.04 usr 0.20 sys + 0.36 cusr
0.91 csys = 1.51 CPU)
Result: FAIL
Failed 1/6 test programs. 0/34 subtests failed.
*** Error code 255
Stop in
/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/HTML-FillInForm-Lite-0.01.
[MSG] [Fri Feb 8 01:47:16 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.72 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.0307. Powered by
POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH =
/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/home/cpan/bin
PERL5LIB =
:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/HTML-FillInForm-Lite-0.01/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/HTML-FillInForm-Lite-0.01/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/HTML-FillInForm-Lite-0.01/blib
PERL5_CPANPLUS_IS_RUNNING = 60510
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/perl5.10.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 20 20 20 2
EGID: $) = 20 20 20 2
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=freebsd, osvers=6.2-release,
archname=i386-freebsd-thread-multi-64int
uname='freebsd forneus.bingosnet.co.uk 6.2-release freebsd 6.2-release
#0: fri jan 12 10:40:27 utc 2007
root@[EMAIL PROTECTED]
i386 '
config_args='-e -Dprefix=/home/cpan/perl5.10.0 -Dusethreads
-Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H
-fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing
-pipe -I/usr/local/include'
ccversion='', gccversion='3.4.6 [FreeBSD] 20060305', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8,
Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lcrypt
perllibs=-lm -lcrypt
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
|
