This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear CHRISY,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Jan 31 01:16:21 2008] Trying to get
'http://www.cpan.org/authors/id/C/CH/CHRISY/Net-Elexol-EtherIO24-0.15.tar.gz'
[MSG] [Thu Jan 31 01:16:23 2008] Trying to get
'http://www.cpan.org/authors/id/C/CH/CHRISY/CHECKSUMS'
[MSG] [Thu Jan 31 01:16:24 2008] Checksum matches for
'Net-Elexol-EtherIO24-0.15.tar.gz'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted 'Net-Elexol-EtherIO24-0.15/'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/examples/'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/examples/irig2.pl'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/examples/eeprom_test.pl'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/examples/irig.pl'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/examples/README'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/META.yml'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/Changes'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted 'Net-Elexol-EtherIO24-0.15/t/'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/t/pod-coverage.t'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/t/00-load.t'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/t/pod.t'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/t/thr.t'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/.cvsignore'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/MANIFEST'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/lib/'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/lib/Net/'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/lib/Net/Elexol/'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/lib/Net/Elexol/EtherIO24.pm'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/README'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted
'Net-Elexol-EtherIO24-0.15/Makefile.PL'
[MSG] [Thu Jan 31 01:16:24 2008] Extracted 'Net::Elexol::EtherIO24' to
'/opt/perl/testers/.cpanplus/5.8.8/build/Net-Elexol-EtherIO24-0.15'
[MSG] [Thu Jan 31 01:16:24 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Net::Elexol::EtherIO24
[MSG] [Thu Jan 31 01:16:24 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Thu Jan 31 01:16:25 2008] cp lib/Net/Elexol/EtherIO24.pm
blib/lib/Net/Elexol/EtherIO24.pm
Manifying blib/man3/Net::Elexol::EtherIO24.3
[ERROR] [Thu Jan 31 01:16:26 2008] MAKE TEST failed:
不希望的裝置輸出入控制 (ioctl) t/00-load...........# Testing
Net::Elexol::EtherIO24 0.15, Perl 5.008008, /opt/perl/testers/bin/perl
ok
t/pod-coverage......skipped: Test::Pod::Coverage 1.04 required for testing
POD coverage
t/pod...............
# Failed test 'blib/lib/Net/Elexol/EtherIO24.pm'
# at /opt/perl/testers/lib/site_perl/5.8.8/Test/Pod.pm line 159.
# blib/lib/Net/Elexol/EtherIO24.pm (189): Unterminated I<...> sequence
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/thr...............ok
Test Summary Re****t
-------------------
t/pod.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=4, Tests=3, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.21 cusr
0.20 csys = 0.45 CPU)
Result: FAIL
Failed 1/4 test programs. 1/3 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Thu Jan 31 01:16:26 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
IO::Select 1.17 0
IO::Socket::INET 1.31 0
Socket 1.78 0
Test::More 0.74 0
threads 1.67 0
threads::shared 1.15 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
|
