This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Ilya Zakharevich,
This is a computer-generated re****t for Math-Pari-2.010709
on perl-5.8.8, created automatically by CPAN-Re****ter-1.0602
and sent to the CPAN Testers mailing list.
If you have received this email directly, it is because the person testing
your distribution chose to send a copy to your CPAN email address; there
may be a delay before the official re****t is received and processed
by CPAN Testers.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems with your distribution. If these results are
not what you expect or if you would like to learn how to avoid FAIL
re****ts for missing dependencies, unsup****ted operating systems, etc.,
please consult "Notes for CPAN Authors" on the CPAN Testers Wiki:
http://cpantest.grango.org
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[none provided]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/home/bob/cpantesting/perl-5.8.8/bin/perl Makefile.PL':
Did not find GP/PARI build directory around.
Do you want to me to fetch GP/PARI automatically?
(If you do not, you will need to fetch it manually, and/or direct me to
the directory with GP/PARI source via the command-line option
paridir=/dir)
Make sure you have a large scrollback buffer to see the messages, or `tee'
the STDOUT/STDERR to a file.
Fetch? (y/n, press Enter)
Well, as you wish...
Rerun Makefile.PL when you fetched GP/PARI archive manually to the
current directory, or a (grand)parent directory of it.
[Keep in mind that version of Math::Pari module corresponds to
the last versions of GP/PARI it was tested with.]
Alternatively, you may specify
pari_tgz=PATH_TO_TAR_GZ
option to Makefile.PL. (There is no need to extract the archive, or
build GP/PARI; but if you have it extracted [and patched, if needed],
you may specify
paridir=PATH_TO_DIST_DIR
option to Makefile.PL)
Could not find GP/PARI build directory, please run Makefile.PL
with paridir=/directory option.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH =
/opt/SUNWspro/bin:/home/bob/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 12276
PERL5_CPAN_IS_EXECUTING =
/home/bob/cpantesting/perl-5.8.8/.cpan/build/Math-Pari-2.010709-b_Rcw5/Makefile.PL
PERL5_CPAN_IS_RUNNING = 12276
PERL_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/bob/cpantesting/perl-5.8.8/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 0 1000
$EGID = 1000 0 1000
Perl module toolchain versions installed:
Module Have
------------------- ------
CPAN 1.9205
Cwd 3.2501
ExtUtils::CBuilder 0.21
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.42
ExtUtils::Manifest 1.51
ExtUtils::Par***S n/a
File::Spec 3.2501
Module::Build 0.2808
Module::Signature n/a
Test::Harness 3.06
Test::More 0.74
YAML 0.66
YAML::Syck 1.00
version n/a
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd
uname='openbsd marge.purple 4.2 generic#375 i386 '
config_args='-Dprefix=/home/bob/cpantesting/perl-5.8.8 -des'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef
usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.5 (propolice)',
gccosandvers='openbsd4.2'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
|
