This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Flavio Poletti,
This is a computer-generated re****t for WWW-Slides-0.0.9
on perl-5.8.8 patch 33008, created automatically by CPAN-Re****ter-1.0602
and sent to the CPAN Testers mailing list.
If you have received this email directly, it is because the person testing
your distribution chose to send a copy to your CPAN email address; there
may be a delay before the official re****t is received and processed
by CPAN Testers.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this re****t:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[none provided]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
make[2]: Entering directory
`/home/sand/.cpan/build/WWW-Slides-0.0.9-Iy8Yyb'
PERL_DL_NONLAZY=1
/home/src/perl/repoperls/installed-perls/maint-5.8/pA4hyOb/perl-5.8.8@[EMAIL PROTECTED]
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')"
t/00.load.t t/pod.t t/Attendee/00.load.t t/Attendee/01.create.t
t/Attendee/02.transition.t t/Attendee/03.ping.t
t/Attendee/04.handle_input.t t/BasicLogger/00.load.t
t/BasicLogger/01.create.t t/BasicLogger/02.default.t
t/BasicLogger/03.stdout.t t/BasicLogger/04.fake.t t/Client/00.load.t
t/Client/01.create.t t/Client/02.traffic.t t/Client/03.get_commands.t
t/Client/50.load-TCP.t t/Client/51.create.t t/Client/52.traffic.t
t/Controller/000.load.t t/Controller/001.create.t t/Controller/002.balks.t
t/Controller/003.tolerates.t t/Controller/004.execute.t
t/Controller/050.Single.load.t t/Controller/051.Single.create.t
t/Controller/052.Single.selector.t t/Controller/053.Single.is_alive.t
t/Controller/054.Single.owns.t t/Controller/055.Single.output.t
t/Controller/056.Single.shut_down.t t/Controller/057.Single.!
execute.t t/Controller/100.Multiple.load.t
t/Controller/101.Multiple.create.t t/Controller/102.Multiple.add-remove.t
t/Controller/103.Multiple.owns.t t/Controller/104.Multiple.execute.t
t/Controller/200.STDIO.load.t t/Controller/201.STDIO.create.t
t/Controller/300.TCP.load.t t/Controller/301.TCP.create.t
t/Controller/302.TCP.owns.t t/Controller/303.TCP.selector.t
t/Controller/304.TCP.execute.t t/Controller/400.UDP.load.t
t/Controller/401.UDP.create.t t/SlideShow/00.load.t t/SlideShow/01.can.t
t/SlideShow/02.read.t t/SlideShow/03.getstuff.t t/SlideShow/04.movement.t
t/SlideTracker/00.load.t t/SlideTracker/01.create.t
t/SlideTracker/02.transition.t
t/00.load.................................# Testing inclusions
# Loading WWW::Slides 0.0.8
# Loading WWW::Slides::Talk 0.0.5
# Loading WWW::Slides::Attendee 0.0.4
# Loading WWW::Slides::SlideShow 0.0.7
# Loading WWW::Slides::SlideTracker 0.0.3
# Loading WWW::Slides::BasicLogger 0.0.5
# Loading WWW::Slides::Controller::UDP 0.0.9
# Loading WWW::Slides::Controller::TCP 0.0.9
# Loading WWW::Slides::Controller::STDIO 0.0.9
# Loading WWW::Slides::Controller::Multiple 0.0.9
# Loading WWW::Slides::Controller::Single 0.0.9
# Loading WWW::Slides::Client::TCP 0.0.3
# Loading WWW::Slides::Client::Base 0.0.5
ok
t/Attendee/00.load........................# Testing WWW::Slides::Attendee
0.0.4
ok
t/Attendee/01.create......................ok
t/Attendee/02.transition..................ok
t/Attendee/03.ping........................ok
t/Attendee/04.handle_input................ok
t/BasicLogger/00.load.....................# Testing
WWW::Slides::BasicLogger 0.0.5
ok
t/BasicLogger/01.create...................ok
t/BasicLogger/02.default..................ok
t/BasicLogger/03.stdout...................ok
t/BasicLogger/04.fake.....................ok
t/Client/00.load..........................# Testing
WWW::Slides::Client::Base 0.0.5
ok
t/Client/01.create........................ok
t/Client/02.traffic.......................ok
t/Client/03.get_commands..................ok
t/Client/50.load-TCP......................# Testing
WWW::Slides::Client::TCP 0.0.3
ok
t/Client/51.create........................ok
t/Client/52.traffic.......................ok
t/Controller/000.load.....................# Testing
WWW::Slides::Controller 0.0.9
ok
t/Controller/001.create...................ok
t/Controller/002.balks....................ok
t/Controller/003.tolerates................ok
t/Controller/004.execute..................ok
t/Controller/050.Single.load..............# Testing
WWW::Slides::Controller::Single 0.0.9
ok
t/Controller/051.Single.create............ok
t/Controller/052.Single.selector..........ok
t/Controller/053.Single.is_alive..........ok
t/Controller/054.Single.owns..............ok
t/Controller/055.Single.output............ok
t/Controller/056.Single.shut_down.........ok
t/Controller/057.Single.execute...........ok
t/Controller/100.Multiple.load............# Testing
WWW::Slides::Controller::Multiple 0.0.9
ok
t/Controller/101.Multiple.create..........ok
t/Controller/102.Multiple.add-remove......ok
t/Controller/103.Multiple.owns............ok
t/Controller/104.Multiple.execute.........ok
t/Controller/200.STDIO.load...............# Testing
WWW::Slides::Controller::STDIO 0.0.9
ok
t/Controller/201.STDIO.create.............ok
t/Controller/300.TCP.load.................# Testing
WWW::Slides::Controller::TCP 0.0.9
ok
t/Controller/301.TCP.create...............ok
t/Controller/302.TCP.owns.................ok
t/Controller/303.TCP.selector.............ok
t/Controller/304.TCP.execute..............ok
t/Controller/400.UDP.load.................# Testing
WWW::Slides::Controller::UDP 0.0.9
ok
t/Controller/401.UDP.create...............ok
t/pod.....................................ok
t/SlideShow/00.load.......................# Testing WWW::Slides::SlideShow
0.0.7
ok
t/SlideShow/01.can........................ok
t/SlideShow/02.read.......................ok
t/SlideShow/03.getstuff...................ok
t/SlideShow/04.movement...................ok
t/SlideTracker/00.load....................# Testing
WWW::Slides::SlideTracker 0.0.3
ok
t/SlideTracker/01.create..................ok
t/SlideTracker/02.transition..............ok
All tests successful.
Files=54, Tests=582, 15 wallclock secs ( 0.37 usr 0.06 sys + 9.92 cusr
0.99 csys = 11.34 CPU)
Result: PASS
make[2]: Leaving directory
`/home/sand/.cpan/build/WWW-Slides-0.0.9-Iy8Yyb'
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
----------------- ---- -------
Carp 0 1.08
Digest::MD5 0 2.36_01
English 0 1.03
File::Basename 0 2.76
HTTP::Response 0 1.53
IO::Handle 0 1.27
IO::Select 0 1.17
IO::Socket 0 1.30
Object::InsideOut 0 3.35
Socket 0 1.80
Test::Exception 0 0.26
Test::MockObject 0 1.08
Test::More 0 0.74
Test::Output 0 0.10
version 0 0.74
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = en_US.utf8
PATH =
/usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 17259
PERL5_CPAN_IS_RUNNING = 17259
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X =
/home/src/perl/repoperls/installed-perls/maint-5.8/pA4hyOb/perl-5.8.8@[EMAIL PROTECTED]
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.9205
Cwd 3.27
ExtUtils::CBuilder 0.21
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.42
ExtUtils::Manifest 1.51_01
ExtUtils::Par***S 2.18
File::Spec 3.27
Module::Build 0.2808
Module::Signature 0.55
Test::Harness 3.07
Test::More 0.74
YAML 0.66
YAML::Syck n/a
version 0.74
--
Summary of my perl5 (revision 5 version 8 subversion 8 patch 33008)
configuration:
Platform:
osname=linux, osvers=2.6.22-1-k7, archname=i686-linux
uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686
gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pA4hyOb/perl-5.8.8@[EMAIL PROTECTED]
-Uversiononly -Dusedevel -des -Ui_db'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef
usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
|
