This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear KWILLIAMS,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Jan 10 00:25:39 2008] Trying to get
'http://www.cpan.org/authors/id/K/KW/KWILLIAMS/Algorithm-SVMLight-0.08.tar.gz'
[MSG] [Thu Jan 10 00:25:41 2008] Trying to get
'http://www.cpan.org/authors/id/K/KW/KWILLIAMS/CHECKSUMS'
[MSG] [Thu Jan 10 00:25:44 2008] Checksum matches for
'Algorithm-SVMLight-0.08.tar.gz'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted 'Algorithm-SVMLight-0.08/'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/Build.PL'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/Changes'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted 'Algorithm-SVMLight-0.08/lib/'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/lib/Algorithm/'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/lib/Algorithm/param_set.c.PL'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/lib/Algorithm/SVMLight.pm'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/lib/Algorithm/SVMLight.xs'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/Makefile.PL'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/MANIFEST'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/META.yml'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/README'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/SVMLight.patch'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted 'Algorithm-SVMLight-0.08/t/'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/t/01-basic.t'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted
'Algorithm-SVMLight-0.08/t/02-custom.t'
[MSG] [Thu Jan 10 00:25:44 2008] Extracted 'Algorithm::SVMLight' to
'/opt/perl/testers/.cpanplus/5.8.8/build/Algorithm-SVMLight-0.08'
[MSG] [Thu Jan 10 00:25:45 2008] # running Build.PL
/opt/perl/testers/bin/perl Build.PL
Warning: this distribution contains XS files, but Module::Build is not
configured with C_sup****t. Please install ExtUtils::CBuilder to enable
C_sup****t.
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Creating new 'Build' script for 'Algorithm-SVMLight' version '0.08'
[MSG] [Thu Jan 10 00:25:45 2008] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Thu Jan 10 00:25:45 2008] Module 'Algorithm::SVMLight' requires
'Module::Build' version '0.21' to be installed
[MSG] [Thu Jan 10 00:25:46 2008] # running Build.PL
/opt/perl/testers/bin/perl Build.PL
* Optional prerequisite ExtUtils::Par***S is not installed
* Optional prerequisite Pod::Readme is not installed
* Optional prerequisite ExtUtils::CBuilder is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the
versions
of the modules indicated above before proceeding with this installation
- ExtUtils::CBuilder is not installed
* Optional prerequisite ExtUtils::Par***S is not installed
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Checking features:
manpage_sup****t....enabled
YAML_sup****t.......enabled
C_sup****t..........disabled
HTML_sup****t.......enabled
Deleting Build
Removed previous script 'Build'
Creating new 'Build' script for 'Module-Build' version '0.2808'
[MSG] [Thu Jan 10 00:27:09 2008] MAKE TEST passed:
t/basic.................ok
t/compat................ok
t/destinations..........ok
t/ext...................ok
t/extend................ok
t/files.................ok
t/help..................ok
t/install...............ok
t/manifypods............ok
t/mbyaml................ok
t/metadata..............ok
t/metadata2.............ok
t/moduleinfo............ok
t/new_from_context......ok
t/notes.................ok
t/par...................skipped: C_sup****t not enabled
t/parents...............ok
t/pod_parser............ok
t/ppm...................skipped: C_sup****t not enabled
t/runthrough............ok
t/signature.............skipped: $ENV{TEST_SIGNATURE} is not set
t/test_type.............ok
t/test_types............ok
t/tilde.................ok
t/versions..............ok
t/xs....................skipped: C_sup****t not enabled
All tests successful.
Files=26, Tests=750, 80 wallclock secs ( 0.34 usr 0.07 sys + 19.86 cusr
17.84 csys = 38.11 CPU)
Result: PASS
[MSG] [Thu Jan 10 00:27:09 2008] Sending test re****t for
'Module-Build-0.2808'
[MSG] [Thu Jan 10 00:27:09 2008] Ok, not sending test re****t
[ERROR] [Thu Jan 10 00:27:10 2008] MAKE failed: 不希望的裝置輸出入控制
(ioctl) /opt/perl/testers/bin/perl lib/Algorithm/param_set.c.PL
lib/Algorithm/param_set.c
Copying lib/Algorithm/SVMLight.pm -> blib/lib/Algorithm/SVMLight.pm
lib/Algorithm/SVMLight.xs -> lib/Algorithm/SVMLight.c
/opt/perl/testers/bin/perl
-I/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld
-I/opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/5.8.8/ExtUtils/xsubpp
-noprototypes -typemap /opt/perl/testers/lib/5.8.8/ExtUtils/typemap
lib/Algorithm/SVMLight.xs
Module::Build is not configured with C_sup****t at
/opt/perl/testers/.cpanplus/5.8.8/build/Module-Build-0.2808/blib/lib/Module/Build/Base.pm
line 3887.
make: *** [all] Error 2
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Module::Build 0.2808 0.21
Test::More 0.74 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
|
