This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@[EMAIL PROTECTED]
to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear ICONTACT,
This is a computer-generated error re****t created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear
at the end of this re****t.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Dec 1 01:00:34 2007] Trying to get
'http://www.cpan.org/authors/id/I/IC/ICONTACT/Net-iContact-0.01.tar.gz'
[MSG] [Sat Dec 1 01:00:36 2007] Trying to get
'http://www.cpan.org/authors/id/I/IC/ICONTACT/CHECKSUMS'
[MSG] [Sat Dec 1 01:00:36 2007] Checksum matches for
'Net-iContact-0.01.tar.gz'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/Changes'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/Makefile.PL'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/t/'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/t/00-load.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/t/gen_.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/contacts.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/to_hashref.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/to_arrayref.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/get_error.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/pod-coverage.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/t/stats.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/t/pod.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/t/01-new.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/02-login.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/putmessage.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/putcontact.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/putsubscription.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/t/campaigns.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/t/lists.t'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/META.yml'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/MANIFEST'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/lib/'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/lib/Net/'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/lib/Net/iContact.pm'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/ex/'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/ex/contactlookup.pl'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/ex/createmessage.pl'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted
'Net-iContact-0.01/ex/printlists.pl'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net-iContact-0.01/README'
[MSG] [Sat Dec 1 01:00:36 2007] Extracted 'Net::iContact' to
'/opt/perl/testers/.cpanplus/5.8.8/build/Net-iContact-0.01'
[MSG] [Sat Dec 1 01:00:37 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite XML::Bare 0 not found.
Warning: prerequisite XML::Generator 0 not found.
Writing Makefile for Net::iContact
[MSG] [Sat Dec 1 01:00:37 2007] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Sat Dec 1 01:00:37 2007] Module 'Net::iContact' requires
'XML::Bare' version '0' to be installed
[MSG] [Sat Dec 1 01:00:37 2007] Module 'Net::iContact' requires
'XML::Generator' version '0' to be installed
[MSG] [Sat Dec 1 01:00:37 2007] Trying to get
'http://www.cpan.org/authors/id/C/CO/CODECHILD/XML-Bare-0.27.tar.gz'
[MSG] [Sat Dec 1 01:00:39 2007] Trying to get
'http://www.cpan.org/authors/id/C/CO/CODECHILD/CHECKSUMS'
[MSG] [Sat Dec 1 01:00:40 2007] Checksum matches for
'XML-Bare-0.27.tar.gz'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/Bare.pm'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/Bare.xs'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/bench.sh'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/Changes'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/feed2.xml'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/Makefile.PL'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/MANIFEST'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/META.yml'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/parser.c'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/parser.h'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/README'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/t/'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/t/Basic.t'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/test.pl'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML-Bare-0.27/test.xml'
[MSG] [Sat Dec 1 01:00:40 2007] Extracted 'XML::Bare' to
'/opt/perl/testers/.cpanplus/5.8.8/build/XML-Bare-0.27'
[MSG] [Sat Dec 1 01:00:41 2007] Checking if your kit is complete...
Looks good
Writing Makefile for XML::Bare
[MSG] [Sat Dec 1 01:00:41 2007] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Sat Dec 1 01:00:42 2007] Please specify prototyping behavior for
Bare.xs (see perlxs manual)
parser.c: In function 'new_attc':
parser.c:52: warning: initialization from incompatible pointer type
cp Bare.pm blib/lib/XML/Bare.pm
Running Mkbootstrap for XML::Bare ()
Manifying blib/man3/XML::Bare.3
[MSG] [Sat Dec 1 01:00:43 2007] MAKE TEST passed: t/Basic......ok
All tests successful.
Files=1, Tests=12, 0 wallclock secs ( 0.01 usr 0.02 sys + 0.06 cusr
0.08 csys = 0.17 CPU)
Result: PASS
-Module- load parse total
[MSG] [Sat Dec 1 01:00:43 2007] Ok, not sending test re****t
[MSG] [Sat Dec 1 01:00:43 2007] Trying to get
'http://www.cpan.org/authors/id/B/BH/BHOLZMAN/XML-Generator-1.01.tar.gz'
[MSG] [Sat Dec 1 01:00:45 2007] Trying to get
'http://www.cpan.org/authors/id/B/BH/BHOLZMAN/CHECKSUMS'
[MSG] [Sat Dec 1 01:00:46 2007] Checksum matches for
'XML-Generator-1.01.tar.gz'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted 'XML-Generator-1.01/'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted 'XML-Generator-1.01/MANIFEST'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted
'XML-Generator-1.01/Makefile.PL'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted 'XML-Generator-1.01/Changes'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted 'XML-Generator-1.01/t/'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted
'XML-Generator-1.01/t/Generator.t'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted 'XML-Generator-1.01/t/DOM.t'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted 'XML-Generator-1.01/DOM.pm'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted
'XML-Generator-1.01/Generator.pm'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted 'XML-Generator-1.01/META.yml'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted 'XML-Generator-1.01/README'
[MSG] [Sat Dec 1 01:00:46 2007] Extracted 'XML::Generator' to
'/opt/perl/testers/.cpanplus/5.8.8/build/XML-Generator-1.01'
[MSG] [Sat Dec 1 01:00:46 2007] Checking if your kit is complete...
Looks good
Writing Makefile for XML::Generator
[MSG] [Sat Dec 1 01:00:46 2007] DEFAULT 'filter_prereqs' HANDLER
RETURNING 'sub return value'
[MSG] [Sat Dec 1 01:00:48 2007] cp Generator.pm blib/lib/XML/Generator.pm
cp DOM.pm blib/lib/XML/Generator/DOM.pm
Manifying blib/man3/XML::Generator.3
Manifying blib/man3/XML::Generator::DOM.3
[MSG] [Sat Dec 1 01:00:48 2007] MAKE TEST passed:
t/DOM............skipped: XML::DOM not installed
t/Generator......ok
All tests successful.
Files=2, Tests=97, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.10 cusr
0.16 csys = 0.31 CPU)
Result: PASS
[MSG] [Sat Dec 1 01:00:49 2007] Ok, not sending test re****t
[MSG] [Sat Dec 1 01:00:50 2007] cp lib/Net/iContact.pm
blib/lib/Net/iContact.pm
Manifying blib/man3/Net::iContact.3
[ERROR] [Sat Dec 1 01:00:57 2007] MAKE TEST failed:
不希望的裝置輸出入控制 (ioctl) t/00-load..............# Testing
Net::iContact 0.01, Perl 5.008008, /opt/perl/testers/bin/perl
ok
t/01-new...............ok
t/02-login.............ok
t/campaigns............ok
t/contacts.............# Looks like you planned 13 tests but only ran 7.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/13 subtests
(less 7 skipped subtests: 0 okay)
t/gen_.................ok
t/get_error............ok
t/lists................ok
t/pod-coverage.........skipped: Test::Pod::Coverage 1.04 required for
testing POD coverage
t/pod..................skipped: Test::Pod 1.14 required for testing POD
t/putcontact...........ok
t/putmessage...........ok
t/putsubscription......ok
t/stats................# Looks like you planned 5 tests but only ran 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/5 subtests
(less 1 skipped subtest: 0 okay)
t/to_arrayref..........ok
t/to_hashref...........ok
Test Summary Re****t
-------------------
t/contacts.t (Wstat: 65280 Tests: 7 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 13 tests but ran 7.
t/stats.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 5 tests but ran 1.
Files=16, Tests=37, 7 wallclock secs ( 0.13 usr 0.07 sys + 1.87 cusr
3.47 csys = 5.54 CPU)
Result: FAIL
Failed 2/16 test programs. 0/37 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Sat Dec 1 01:00:57 2007] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Digest::MD5 2.36 0
HTTP::Request::Common 1.28 0
LWP::UserAgent 2.036 0
Test::More 0.72 0
XML::Bare 0.27 0
XML::Generator 1.01 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This re****t was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007
x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g
-O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true
-Dcf_email=imacat@[EMAIL PROTECTED]
'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING
-fno-strict-aliasing -pipe -Wdeclaration-after-statement
-I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian
4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16,
Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
|
