Dear mraymus:
On Feb 6, 10:02=A0am, mraymus <mray...@[EMAIL PROTECTED]
> wrote:
> >http://www.ousob.com/ng/53error/ng39b05.php
>
> > Check the path, check where base52.pll is located,
> > and make sure the application can find it to load
> > it. =A0I'd check this first.
>
> Thanks for the speedy reply. =A0 I've passed this
> information on to my customer, however, all we've
> really done is upgrade the NetWare server
> from 4.11 to 6.5. =A0 =A0Nothing on the local PC
> environment changed.
Nothing on the PC environment (based on your config files below) of
importance is controlled by the configuration files. Like the path.
> Are you suggesting from this note that we should
> increase files on their DOS startup files?
A place to start, after you check the path.
> Here's a copy of their config.sys & autoexec.bat
> Config.sys
=2E.. no path
> Autoexec.bat
=2E.. no path
You are depending on the Netware login scripts to assign path. This
may or may not even include DOS directory where the various DOS
utilities reside.
I wonder if these values:
> LH /L:1,4144 WATCH
> LH /L:1,18832 LSL
> LH /L:1,65536 b44
> LH /L:1,39872 IPXODI
> LH /L:0;1,57888 /S vlm
=2E.. are correct for the new Netware? I would have no way of knowing.
Splicing in your followup post...
> Something else that was mentioned was this:
> I'm wondering if it is a case of the volume being
> too large for DOS to figure out what is going on.
> Is it a possibility that the new volume on this
> new server is too big? I believe it's 4 Gigs.
> If that's an issue we can definitely decrease the
> size of the volume.
If the DOS executable starts from this directory without issue, and
one person is able to log on (as you say), then I don't see it as a
problem.
The "one person" that can get on... is it the same computer, or can
any computer be first, and lock the others out? If it doesn't matter,
and you cannot place the executables and plls in a "readonly"
directory, then you will likely have to have the plls on the
individual computers.
David A. Smith
|
