EASY08 is a development system thought for the designers of systems
based on the family of microcontroller HC908 of Motorola.
The EASY08 takes advantage of the functions ISP (In-System Programming)
and ICS (In-Circuit Simulation) of these processors to program their
flash memory and to allow the simulation of the program in real time.
Next to other programs, like CodeWarrior or the assemblers of P&E
Micro, EASY08 provides to the developer of all the tools necessary
successfully to carry out all the stages of development, including:
edition of the code, assembled or compilation, engraving of the flash
and simulation of the program in the same plate where the final version
will run. This type of simulation, in real time, at the authentic speed
of micro allows to verify that as much software as the hardware behaves
as it had been planned. The EASY08 connects to a PC through a ****t
series RS232 and to the plate that micro through an interface contains
type MON08 with a flat cable of 20 threads. Optionally, the
microcontrollers can record outside the used circuit the plate
programmer who comes including.
Main characteristics EASY08 are:
=B7Execution of the code in real time with no need of expensive
emulators.
=B7Purification of the program in the same plate where the definitive
version will run.
=B7Joint verification of the program and the hardware.
=B7Programming of the Flash without clearing micro of the circuit,
anyone is their encapsulation.
=B7Plate of plug-in Programming.
=B7Automatic generation of Vtst for the recording of the Flash.
=B7Compatibility with Code Warrior de Metrowerks and Win-IDE of P&E
Micro
Kit complete so that it begins to develop his own applications with the
microcontrollers of the family HC08 who includes the following
elements:
* Kit EASY08
* Plate Programmer (allows to record
Gp32/GP20/JK1/JK3/JK8/JL3/JL8/QTx/QYx
* cable MON08
* Power supply
* Manual of User
* CD of Installation
* Microcontroller HC908 DEMO
If it wishes to receive more information about this product it can
contact to us to info@[EMAIL PROTECTED]
|
